暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dell 8TB 3.5 inch SATA internal hard drive

DELL

DELL 400-AHIE 8TB 3.5" SATA 7200 RPM internal hard drive

SKU CH-5ACH-V0RCE

An 8 TB desktop drive spinning at 7200 RPM with a 128 MB buffer and SATA 6.0 Gb/s interface

  • InterfaceSATA 6.0Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 8 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • 128 MB buffer smooths heavy read and write workloads
  • SATA 6.0 Gb/s interface fits standard desktop drive bays
  • 5 inch form factor matches common chassis mounting points

Dell 400-AHIE 8 TB internal hard drive

This Dell 400-AHIE is an 8 TB internal hard drive built for desktop systems. It connects through a SATA 6.0 Gb/s interface and spins at 7200 RPM with a 128 MB buffer. The 3.5 inch form factor fits standard drive bays in towers and workstations. It arrives new in retail or OEM packaging.

Suited for bulk storage in desktops and workstations

The drive serves well for large media libraries, backups and archival data where capacity per pound matters. It is not for buyers who need the low latency of solid state storage for operating systems or active workloads. Systems limited to the older SATA 3.0 Gb/s standard will operate the drive at the lower speed. Laptops and small-form-factor chassis that only accept 2.5 inch drives cannot use this unit.

SATA 6.0 Gb/s interface and 7200 RPM spindle speed

The SATA 6.0 Gb/s interface sets the maximum host transfer rate at 600 MB/s. The 7200 RPM spindle speed determines the sustained throughput and access times you will see in daily use. Verify that your motherboard or controller provides a SATA 6.0 Gb/s port and a 3.5 inch bay with adequate cooling for continuous operation.

特長

  • 8 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive data access
  • 128 MB buffer smooths heavy read and write workloads
  • SATA 6.0 Gb/s interface fits standard desktop drive bays
  • 5 inch form factor matches common chassis mounting points

仕様

BrandDell
Model400-AHIE
InterfaceSATA 6.0Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

What SATA host-port speed does my motherboard need to run this 400-AHIE at its rated 6.0 Gb/s interface?

The drive uses the SATA 6.0 Gb/s standard, so the host controller must support SATA/600 to achieve the full transfer rate.

Can I keep my existing 3.5" SATA drives and add this 8 TB model without changing cables or power connectors?

Yes, it shares the same 3.5" form factor, SATA data and power connectors, so it fits alongside older SATA drives in the same bays.

How do I verify the 128 MB buffer and 7200 RPM spindle are active after installation?

Check the drive’s SMART data or BIOS identification — both will report 7200 RPM spindle speed and a 128 MB cache size.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。