暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-ALQC 4TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-96PD-5RPPM

4 TB 3.5" SAS hard drive spins at 7200 RPM with a 12 Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Average Latency3Gb/s
  • Form Factor3.5"
  • 4TB capacity stores large datasets
  • 12Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray allows drive replacement without system shutdown

Dell 400-ALQC 4TB SAS hard drive

This 3.5-inch internal hard drive provides 4TB of storage on a SAS interface spinning at 7200 RPM. It is built for nearline workloads in Dell servers and storage arrays where hot-swap capability is required. The bare-drive packaging suits system integrators and IT departments replacing or expanding existing drive bays.

Upgrade from slower nearline SAS drives

The 12Gb/s transfer rate doubles the throughput of 6Gb/s nearline drives, cutting backup windows and speeding sequential reads for archival workloads. The jump is worth it when the controller and backplane both support 12Gb/s; on a 6Gb/s backplane the drive will negotiate down and the extra headroom goes unused.

Limits of 12Gb/s SAS interface

The interface tops out at 12Gb/s, so sustained throughput cannot exceed the electrical signalling limit regardless of spindle speed. Cable length, backplane design and controller firmware all introduce real-world overhead that reduces effective bandwidth below the nominal rate. Buyers needing higher random IOPS or lower latency should evaluate solid-state alternatives.

特長

  • 4TB capacity stores large datasets
  • 12Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray allows drive replacement without system shutdown

仕様

BrandDell
Model400-ALQC
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity4TB
RPM7200 RPM
Average Latency3Gb/s
Form Factor3.5"

この商品に関する質問

Will the 3.5" form factor fit my standard drive bay?

The 3.5" form factor matches standard internal drive bays; ensure your chassis accepts 3.5" SAS drives.

How do I install the hot-swap tray correctly?

Slide the drive into the hot-swap tray until the SAS connector seats firmly; the common mistake is stopping before the latch clicks.

When should I plan to replace the 4TB SAS drive?

Replace the drive if SMART reports reallocated sectors or if sustained throughput drops below expected 7200 RPM levels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。