暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 400-ALUF 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-2N2G-TB3WQ

A 1.8TB SAS hard drive spinning at 10000 RPM with a 12Gb/s interface and hot-swap tray for 2.5-inch bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10K RPM delivers fast data access
  • SAS 12Gb/s interface enables high-speed transfers
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive changes without downtime

Dell 400-ALUF 1.8TB SAS 10K Drive

This Dell 400-ALUF is a 1.8TB 2.5-inch SAS hard drive spinning at 10,000 RPM with a 12Gb/s transfer rate. It is built for Dell servers and storage arrays that require hot-swap capability. The bare-drive unit delivers high-throughput mechanical storage for enterprise workloads.

Suits SAS bays needing 10K speed.

This drive fits administrators who need 10K rotational speed on a SAS 12Gb/s interface and hot-swap tray support. It is not for buyers who require solid-state latency or a different interface than SAS. Capacity is fixed at 1.8TB, so those needing larger single volumes must look elsewhere.

1.8TB capacity decides fit

The single specification that determines compatibility is the 1.8TB capacity combined with the SAS 12Gb/s interface and 2.5-inch form factor. Verify the storage array accepts this exact capacity and interface before purchase. The 10,000 RPM spindle speed and hot-swap tray are fixed attributes of this part.

特長

  • 8TB capacity stores large datasets
  • 10K RPM delivers fast data access
  • SAS 12Gb/s interface enables high-speed transfers
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive changes without downtime

仕様

BrandDell
Model400-AJPM
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

この商品に関する質問

How do I confirm the 1.8TB SAS drive is running at 10000 RPM after installation?

Check the drive's reported speed in your RAID controller BIOS or system monitoring tool; it should show 10000 RPM and a 12Gb/s link rate.

What comes with the bare drive and what must I source separately?

The package contains only the 2.5" SAS hard drive itself; you will need a compatible hot-swap tray or caddy, SAS data and power cables, and a controller that supports 12Gb/s SAS.

Should I choose the 1.8TB or 1.2TB version for a Dell server?

Select the 1.8TB model (part 400-ALUF) for maximum capacity; the 1.2TB variant is a different part number and offers less storage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。