暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
2.5 inch SAS hard drive in hot swap tray

DELL

DELL 400-ALUN 1TB 2.5" SAS 7.2K 12Gb/s Hot Swap internal hard drive

SKU CH-NCZP-YQYZT

A 1 TB 2.5" SAS hard drive spinning at 7200 RPM with 12 Gb/s transfer and hot-swap capability

  • PackagingBare Drive
  • InterfaceSAS
  • Capacity1TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 1TB capacity stores large datasets
  • 5 inch form factor fits compact bays
  • SAS interface provides 12Gb/s throughput
  • 7200 RPM spindle delivers 7.2K performance
  • Hot swap tray enables drive changes without downtime

Dell 1TB 2.5" SAS Hot-Swap Drive

This new Dell 400-ALUN is a 1TB 2.5-inch hard drive with a 12Gb/s SAS interface and 7200 RPM spindle speed. It arrives as a bare drive ready for hot-swap installation in compatible bays. The 7.2K rotation rate balances capacity and throughput for general-purpose storage arrays.

Suited to SAS arrays needing hot-swap 1TB capacity

IT teams expanding Dell PowerEdge or equal SAS storage shelves can add this drive without powering down the chassis. Buyers whose servers only accept 3.5-inch carriers, or who need a 15K spindle for transaction-heavy workloads, should look at a different form factor or speed class.

Interface is 12Gb/s SAS

The drive communicates over a 12Gb/s SAS link, so the backplane and controller must support that signalling rate. A 6Gb/s-only SAS backplane will not recognise the drive, making host-interface confirmation essential before purchase.

特長

  • 1TB capacity stores large datasets
  • 5 inch form factor fits compact bays
  • SAS interface provides 12Gb/s throughput
  • 7200 RPM spindle delivers 7.2K performance
  • Hot swap tray enables drive changes without downtime

仕様

BrandDell
Model400-ALUN
PackagingBare Drive
InterfaceSAS
Capacity1TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor2.5"

この商品に関する質問

Does the 2.5" SAS drive fit a standard 2.5" hot-swap bay?

Yes, the 2.5" form factor matches a standard 2.5" hot-swap drive bay. The SAS interface connects directly to the backplane.

What is the correct way to install the hot-swap drive, and which step is often missed?

Slide the drive into the bay until the SAS connector seats firmly on the backplane, then engage the release lever to lock it. The step often missed is fully latching the lever so the drive cannot vibrate loose.

When should the 1TB 7200 RPM SAS drive be replaced in a server running continuous workloads?

Replace the drive when SMART attributes show reallocated sectors, seek errors or excessive spin-up retries, or after the manufacturer-rated service life for 7200 RPM SAS drives is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。