暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch internal hard drive with SATA connector

DELL

DELL 400-AOJN 8 TB 3.5" SATA 7200 RPM Internal Hard Drive

SKU CH-NQ6B-G4P0R

8 TB 3.5" SATA hard drive spinning at 7200 RPM, built for Dell EMC PowerEdge T340 servers

  • InterfaceSATA 6.0Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6.0 Gb/s interface enables high-throughput transfers
  • 512e disk format ensures broad compatibility
  • 5-inch form factor fits standard server bays

Dell 400-AOJN 8 TB 3.5" SATA Drive

The Dell 400-AOJN is an 8 TB internal hard drive built for server and desktop storage. It operates at 7200 RPM with a SATA 6.0Gb/s interface and a 512e disk format. The 3.5-inch form factor fits standard drive bays in compatible Dell EMC PowerEdge systems.

Suited for Dell EMC PowerEdge T340 storage expansion

This drive matches the specified compatibility for the Dell EMC PowerEdge T340 server. It serves administrators adding bulk capacity to that platform. Buyers using other server models or non-Dell chassis should verify fitment before purchase.

512e disk format with SATA 6.0Gb/s interface

The drive presents 512-byte logical sectors while using 4 KB physical sectors on the media. This 512e format ensures broad operating system and controller compatibility. The SATA 6.0Gb/s interface determines the maximum host transfer rate.

特長

  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6.0 Gb/s interface enables high-throughput transfers
  • 512e disk format ensures broad compatibility
  • 5-inch form factor fits standard server bays

仕様

BrandSeagate
Model400-AOJN
InterfaceSATA 6.0Gb/s
Capacity8TB
RPM7200 RPM
Average Latency6Gb/s
Form Factor2.5"

この商品に関する質問

What does the 7200 RPM spindle speed mean for actual throughput in a server?

The 7200 RPM spindle speed supports sustained sequential transfers up to the SATA 6.0 Gb/s interface limit, typical for bulk storage workloads in a PowerEdge T340.

How does the SATA/600 interface standard cap real-world performance?

The SATA/600 interface caps the drive at 6.0 Gb/s maximum transfer rate, so sustained reads and writes cannot exceed that bandwidth regardless of spindle speed.

Will the 3.5" form factor fit directly into a PowerEdge T340 drive bay?

Yes, the 3.5" form factor matches the standard drive bays in the Dell EMC PowerEdge T340, so it installs without adapters.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。