DELL
DELL 400-APGS 900GB 2.5" SAS 15K 12Gb/s internal hard drive
A 900GB 2.5" SAS hard drive spinning at 15K RPM with a 12Gb/s transfer rate and hot-swap capability
- PackagingBare Drive
- InterfaceSAS 3Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency3Gb/s
- Form Factor2.5"
- 900 GB capacity stores large enterprise datasets
- 15K RPM spindle delivers fast random access
- 12 Gb/s SAS interface supports high-throughput workloads
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
Dell 400-APGS 900GB SAS Drive
This Dell 400-APGS is a 900GB 2.5-inch SAS hard drive spinning at 15K RPM with a 12Gb/s transfer rate. It is built for enterprise servers and storage arrays that require high-speed mechanical storage in a hot-swap form factor. The bare drive carries Dell original part number 400-APGS and is supplied new.
Suits 15K SAS environments not 10K
This drive suits administrators upgrading or repairing Dell systems specified for 15K SAS 12Gb/s operation. Buyers whose chassis or controller only support 10K RPM drives or lower transfer rates should look elsewhere. The hot-swap tray type requires a compatible drive bay for tool-less installation.
15K RPM decides fit
The 15K RPM spindle speed is the single specification that determines whether this part matches the required performance tier. A system designed for 10000 RPM drives will not achieve the intended IOPS profile with this unit. Verify the server specification calls for 15K SAS before purchase.
特長
- 900 GB capacity stores large enterprise datasets
- 15K RPM spindle delivers fast random access
- 12 Gb/s SAS interface supports high-throughput workloads
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
仕様
| Brand | Dell |
|---|---|
| Model | 400-ALSE |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 3Gb/s |
| Form Factor | 2.5" |
この商品に関する質問
Will the 15K RPM motor or bearings need replacement after heavy use?
The drive spins at 15K RPM and is a mechanical HDD, so the motor and bearings will eventually wear and require replacement.
Does the 12Gb/s SAS link or the 15K spindle saturate first during sustained writes?
The 15K RPM spindle typically reaches its throughput ceiling before the 12Gb/s SAS interface becomes the bottleneck.
How much heat and noise does the 15K RPM drive produce when running all day?
A 15K RPM HDD generates noticeable heat and audible whine under continuous operation, so plan for active cooling in the chassis.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
