暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dell 400-ATKL 4TB SAS hard drive in 3.5 inch carrier tray

DELL

DELL 400-ATKL 4TB 7200 RPM SAS 12Gb/s 3.5" Internal Hard Drive

SKU CH-869N-JAV6M

A 4 TB enterprise hard drive spinning at 7200 RPM with a 12 Gb/s SAS interface, supplied in a gen 14 carrier for direct installation in compatible PowerEdge servers

  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • FeaturesCompatible With The Following Dell Servers and Dell Storage
  • UsageFor Enterprise Storage
  • Form Factor3.5"

Options 4TB 7200RPM

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Enterprise 12Gb/s SAS throughput for high-demand workloads
  • 7200 RPM spindle delivers consistent nearline performance
  • 4TB capacity in a 3.5" form factor for dense storage arrays
  • Purpose-built for gen 14 and gen 15 PowerEdge servers
  • Supplied in a G14 hot-swap carrier for tool-less installation

Dell 400-ATKL 4TB SAS Enterprise Drive

This Dell 400-ATKL is a 4TB 3.5-inch internal hard drive built for enterprise storage. It spins at 7200 RPM and uses a SAS 12Gb/s interface. The drive ships new in a genuine Dell generation 14 carrier tray. It is designed for 24x7 availability in data centre environments.

Suits gen 14 and 15 PowerEdge servers.

This drive fits PowerEdge rack servers from the 14th and 15th generations including R240, R340, R440, R540, R640, R740, R740XD and R740XD2 models. It also supports R6415, R7415, R7425, R6515, R6525, R7515, R7525 and R450 platforms. Systems without SAS 12Gb/s backplanes or controllers cannot use this drive. Desktop PCs and consumer NAS units lacking enterprise SAS infrastructure should look elsewhere.

SAS 12Gb/s interface determines compatibility

The single specification that decides fitment is the SAS 12Gb/s interface. Your server chassis and backplane must support this exact interface and the 3.5-inch LFF form factor. Verify your specific PowerEdge model appears in the supported list before purchase. The included generation 14 tray ensures correct installation in compatible Dell servers.

特長

  • Enterprise 12Gb/s SAS throughput for high-demand workloads
  • 7200 RPM spindle delivers consistent nearline performance
  • 4TB capacity in a 3.5" form factor for dense storage arrays
  • Purpose-built for gen 14 and gen 15 PowerEdge servers
  • Supplied in a G14 hot-swap carrier for tool-less installation

仕様

BrandDell
Model400-ATKL
InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
FeaturesCompatible With The Following Dell Servers and Dell Storage Arrays:PowerEdge Rack Series (14th & 15th gen. 3.5" LFF Chassis):R240 R340 R440 R540 R640 R6415 R740 R740XD R740XD2 R7415 R7425 R6515 R6525 R7515 R7525 R450 R550 R650 R650xs R750 R750xs
UsageFor Enterprise Storage
Form Factor3.5"

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 4TB 7200 RPM SAS 12Gb/s drive work in my older PowerEdge R640 server?

Yes, the 400-ATKL is listed as compatible with 14th and 15th generation PowerEdge rack servers including the R640 3.5" LFF chassis.

How can I verify the 12Gb/s SAS link is active after installing the drive?

Check the server RAID controller BIOS or iDRAC interface; it will report the negotiated link speed as 12Gb/s for this Nearline SAS device.

Does the 3.5-inch drive ship with the Gen 14 hot-swap tray attached or must I order it separately?

The drive comes with the carrier attached, so the Gen 14 hot-swap tray is included and no separate caddy purchase is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。