SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
DELL
A 4 TB 3.5-inch nearline drive spinning at 7200 RPM with a SAS 12Gb/s interface for high-capacity internal storage
The Dell 400-ATKM is a 4 TB internal hard drive built for 3.5-inch bays. It uses a SAS 12Gb/s connection and spins at 7200 RPM. The drive targets servers and workstations that need nearline storage with a 512n advanced format.
Sustained external transfers reach 1.2 GBps over the SAS link. The 7200 RPM spindle gives low average latency for random reads and writes. Workloads that exceed the 4 TB capacity or demand higher IOPS will need additional drives or a faster media tier.
The unit ships as a bare drive without cables, brackets or software utilities. Retail or OEM packing may vary. Installation relies on the host chassis providing power and a compatible SAS backplane or controller.
| Brand | Dell |
|---|---|
| Model | 400-ATKM |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 3.5" |
Yes, the SAS 12 Gb/s interface auto-negotiates to 6 Gb/s or 3 Gb/s on legacy controllers without any jumper changes.
Check the spindle speed in SMART data or the BIOS hardware monitor; both will report 7200 rpm when the drive is spinning normally.
No, bare-drive packaging includes only the drive itself; mounting screws and a SAS data cable must be sourced separately.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?