暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

Dell 400-ATKO 4 TB 3.5" 7200 rpm SATA 600 internal hard drive

SKU CH-PPZZ-RJ258

A 4 TB 3.5" internal hard drive spinning at 7200 rpm with a SATA 600 interface

  • 4 TB capacity stores large media libraries
  • 7200 rpm spindle speed delivers responsive data access
  • SATA 600 interface provides 6 Gb/s transfer bandwidth
  • 5 inch form factor fits standard desktop drive bays
  • New condition ensures full manufacturer specification performance

4 TB 3.5" SATA 600 drive

This 4 TB internal hard drive fits standard 3.5-inch bays and connects through a SATA 600 interface. It is built for desktop workstations and home servers that need bulk storage for media libraries, backups or archival data.

7200 rpm spindle and SATA connector

The drive spins at 7200 rpm and uses the SATA 600 interface for data transfer and power. The standard 3.5-inch form factor means it mounts directly in most desktop chassis without adapters, and the single cable layout keeps cabling simple.

Replaces smaller 3.5" SATA drives

Upgrading from a lower-capacity 3.5-inch SATA drive adds terabytes of space without changing cables, brackets or drive bays. The jump is worthwhile when current storage is full and the system already supports SATA 600.

特長

  • 4 TB capacity stores large media libraries
  • 7200 rpm spindle speed delivers responsive data access
  • SATA 600 interface provides 6 Gb/s transfer bandwidth
  • 5 inch form factor fits standard desktop drive bays
  • New condition ensures full manufacturer specification performance

仕様

BrandDell

この商品に関する質問

What does the SATA/600 interface standard mean for this drive?

The SATA/600 interface supports up to 6 Gbit/s theoretical bandwidth, matching the native speed of the Dell 400-ATKO.

Will the 3.5 inch form factor fit my desktop bay?

The drive uses the standard 3.5 inch internal form factor, so it fits any desktop 3.5 inch drive bay or mounting bracket.

How do I install the Dell 400-ATKO and what step is often missed?

Mount the drive in a 3.5 inch bay, connect a SATA data cable to the motherboard and a SATA power cable from the PSU, then initialise the disk in your OS — the step often missed is initialising and formatting the new volume before use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。