暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive bare unit

DELL

DELL 400-AXNV 12TB 3.5" SAS 7.2K 12Gb/s internal hard drive

SKU CH-80DD-X2FNF

A 12 TB 3.5" SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity12TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 12 TB capacity stores massive datasets
  • SAS 12 Gb/s interface moves data fast
  • 7200 RPM spindle delivers responsive throughput
  • 5-inch form factor fits standard bays
  • New condition ensures full manufacturer life

12 TB SAS 7.2K Hard Drive

This 12 TB SAS hard drive operates at 7.2K RPM with a 12 Gb/s interface and a 3.5-inch form factor. It is built for Dell systems that require high-capacity nearline storage. The bare drive ships without a tray and carries Dell part number 400-AXNV.

Servers and arrays needing 12 Gb/s SAS

This drive suits servers and storage arrays that accept 3.5-inch SAS drives at 12 Gb/s and need 12 TB of capacity. It is not for systems that only support 2.5-inch bays, nor for platforms that require a different interface or a pre-installed mounting tray.

12 Gb/s SAS interface

The single specification that decides fit is the 12 Gb/s SAS interface combined with the 3.5-inch form factor. Controllers and backplanes must support this exact interface and physical size for the drive to function.

特長

  • 12 TB capacity stores massive datasets
  • SAS 12 Gb/s interface moves data fast
  • 7200 RPM spindle delivers responsive throughput
  • 5-inch form factor fits standard bays
  • New condition ensures full manufacturer life

仕様

BrandDell
Model400-ANWP
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity12TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor2.5"

この商品に関する質問

Will the 3.5" form factor fit my server bay?

The drive uses a standard 3.5" form factor and mounts in any compatible SAS hot-swap bay or fixed cage that accepts 3.5" SAS drives.

How do I install the SAS drive correctly?

Align the SAS connector with the backplane, slide the carrier in until the latch clicks, and ensure the release lever is fully seated to avoid intermittent detection.

When should I plan to replace this 7200 RPM drive?

Monitor SMART reallocated sector counts and replace the 12TB unit once the annualised failure rate rises or the drive exceeds your defined service-life threshold.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。