暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 463-4953 4 TB 3.5" 7200 rpm SATA internal hard drive

SKU CH-ZJHF-98753

A 4 TB internal hard drive with a 7200 rpm spindle speed and a SATA 6.0Gb/s interface for desktop storage

  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • Form Factor3.5"
  • 4 TB capacity stores large media libraries and backups
  • 7200 rpm spindle speed delivers responsive desktop performance
  • SATA 6.0 Gb/s interface provides broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer-rated reliability

Desktop storage for bulk data

This 3.5-inch internal hard drive delivers 4 TB of capacity over a SATA 6.0 Gb/s interface, spinning at 7200 rpm. It suits desktop builders and upgraders who need large, cost-effective storage for media libraries, backups or archival workloads. The drive installs in any standard 3.5-inch bay and requires no additional controller beyond a native SATA port.

Packed as a bare drive

The unit ships without mounting screws, cables, cloning software or diagnostic utilities, so installers must supply their own SATA data and power leads and any bracket hardware the chassis requires. Retail or OEM packaging may vary, but the drive itself remains a standard 463-4953 mechanism ready for immediate integration.

SATA 6.0 Gb/s interface

The single specification that determines compatibility is the SATA/600 interface; systems limited to SATA 3.0 Gb/s will operate the drive at the lower speed, while any desktop with a free SATA 6.0 Gb/s port can use the full throughput. Buyers whose motherboards lack a SATA connection cannot install this drive without an add-in controller card.

特長

  • 4 TB capacity stores large media libraries and backups
  • 7200 rpm spindle speed delivers responsive desktop performance
  • SATA 6.0 Gb/s interface provides broad motherboard compatibility
  • 5 inch form factor fits standard drive bays
  • New condition ensures full manufacturer-rated reliability

仕様

InterfaceSATA 6.0Gb/s
Capacity4TB
Form Factor3.5"

この商品に関する質問

Will the 7200 rpm spindle motor or the SATA 6.0Gb/s controller board need replacement first in the 463-4953?

The 7200 rpm spindle motor and its bearings are the mechanical parts most likely to wear out before the SATA 6.0Gb/s controller electronics in the 463-4953.

What limit appears first when the 4 TB drive writes continuously at 7200 rpm over the SATA 6.0Gb/s link?

Sustained write speed settles at the 7200 rpm media rate, which is lower than the SATA 6.0Gb/s interface ceiling, so the platter speed becomes the bottleneck.

How much heat and noise does the 3.5" 7200 rpm mechanism produce when it runs all day in a desktop chassis?

A 3.5" 7200 rpm drive generates noticeable warmth and a steady mechanical hum during all-day operation; ensure the case has front-intake airflow over the drive bay.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。