暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch hard drive with black label and attached server tray

DELL

DELL 4TB 7.2K SAS 6G LFF 3.5" internal hard drive 9ZM270-150

SKU CH-YEKF-9C5D4

4 TB 7.2K SAS 6Gb/s 3.5" drive with 128 MB cache, ships with caddy for PowerEdge R310, R320, R410, R415, R420, R510, R515, R520, R610, R620, R710, R720, R720xd, T310, T320, T410, T420, T610, T620.

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface fits existing controllers
  • 128 MB cache buffers heavy workloads
  • Ships with caddy for direct server install

4 TB 7.2K SAS 6 Gb/s LFF drive

This 3.5 inch internal hard drive delivers 4 TB of storage on a SAS 6 Gb/s interface spinning at 7 200 RPM with a 128 MB buffer. It ships new in an original Dell caddy and carries the Dell part number 9ZM270-150 alongside the manufacturer model ST4000NM0023.

Suits Dell PowerEdge servers listed.

The drive is validated for PowerEdge R310, R320, R410, R415, R420, R510, R515, R520, R710, R720, R720xd, T310, T320, T410, T420, T610, T620 and T710 systems. Builders whose chassis or controller accept only a different interface or a smaller form factor must select another part.

SAS 6 Gb/s interface decides fit

The single specification that determines compatibility is the 3.5 inch SAS 6 Gb/s connection; verify that your server backplane and RAID controller support this exact interface before purchase.

特長

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SAS 6 Gb/s interface fits existing controllers
  • 128 MB cache buffers heavy workloads
  • Ships with caddy for direct server install

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What SAS controller or backplane must my system provide for the 3.5" SAS 6Gb/s interface?

The drive needs a SAS 6Gb/s backplane or HBA with a 3.5-inch drive bay; Dell PowerEdge R310, R410, R510, R710, T310, T410, T610 and T710 models include the required backplane.

Will the 7200RPM spindle speed and 128MB cache work with older 3Gb/s SAS backplanes in legacy PowerEdge servers?

The 7.2K RPM drive negotiates down to 3Gb/s on older backplanes, so it spins up in R310, R410, R510, R710, T310, T410, T610 and T710 systems, though sustained throughput stays at the lower link rate.

How can I confirm the ST4000NM0023 mechanism is recognised and healthy after installing it with the supplied R-series caddy?

In the PERC or HBA BIOS the drive should appear as a 4TB SAS device at 6Gb/s (or 3Gb/s on older controllers); run a SMART short self-test and verify zero reallocated sectors to confirm health.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。