暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Standard 3.5 inch silver hard drive with SAS connector

DELL

DELL 55H49 3TB 7.2K SAS 3.5" internal hard drive

SKU CH-49XE-3QT4C

3 TB SAS hard drive spins at 7200 RPM in a 3.5 inch form factor for desktop storage

  • 3 TB capacity stores large datasets
  • 7200 RPM rotation delivers responsive data access
  • SAS 6 Gbps interface enables fast host communication
  • 5 inch form factor fits standard drive bays
  • New condition provides full manufacturer reliability

Dell 55H49 3 TB SAS hard drive

The Dell 55H49 is a 3.5-inch internal hard drive offering 3 TB of storage. It connects through a SAS interface running at 6 Gbps and spins at 7200 RPM. The drive is supplied new and has been tested for reliable operation in desktop systems.

Suits SAS-equipped desktops and servers.

This drive fits desktop workstations or servers that provide a SAS backplane or controller. Buyers whose systems only have SATA ports should look elsewhere because the drive requires a SAS connection. It also does not suit 2.5-inch drive bays or external enclosures lacking SAS support.

SAS 6 Gbps interface decides compatibility

The single specification that determines fit is the SAS 6 Gbps interface. Your motherboard or controller must support this exact protocol; a standard SATA port will not work with this drive. Verify the interface before purchase to avoid installation issues.

特長

  • 3 TB capacity stores large datasets
  • 7200 RPM rotation delivers responsive data access
  • SAS 6 Gbps interface enables fast host communication
  • 5 inch form factor fits standard drive bays
  • New condition provides full manufacturer reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Do I need a SAS controller or HBA that supports 6 Gbps to use the 55H49 3 TB drive?

Yes, the 55H49 requires a SAS controller or HBA with a 6 Gbps SAS port; it will not work on a standard SATA-only motherboard header.

Can the 55H49 share the same SAS backplane or controller as my existing 3 Gbps SAS drives?

The 55H49 is compatible with 3 Gbps SAS backplanes and controllers, but it will negotiate down to the slower 3 Gbps link speed.

How can I verify the 55H49 is running at its rated 7200 RPM and 6 Gbps after installation?

Check the negotiated link speed and rotation rate in your RAID controller BIOS, HBA utility, or SMART data; both should report 6 Gbps and 7200 RPM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。