暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS enterprise SSD with label visible

DELL

DELL 84C40 7.68TB 12Gbps SAS 2.5 enterprise SSD

SKU CH-34XC-YTVGE

High-capacity 7.68 TB SAS enterprise SSD in 2.5 inch form factor for read-intensive server workloads

  • InterfaceSAS
  • 68 TB capacity supports large datasets
  • 12 Gbps SAS interface delivers fast data transfer
  • Read-intensive TLC design suits heavy read workloads
  • 5 inch form factor fits standard drive bays
  • Compatible with numerous Dell PowerEdge servers

Dell 84C40 7.68TB SAS SSD

The Dell 84C40 is a 7.68TB enterprise solid-state drive built for read-intensive workloads. It uses a 12Gbps SAS interface and a 2.5-inch form factor. The drive suits database servers, virtualisation hosts and content repositories that demand high capacity and consistent read performance.

PM1643a TLC firmware update

The PM1643a controller and TLC NAND are shipped with updated firmware and full component testing. This preparation reduces deployment time and helps maintain steady read latency across the supported Dell PowerEdge platforms. No extra configuration utilities are bundled with the drive.

7.68TB read-intensive capacity

The 7.68TB capacity provides ample headroom for large read-heavy datasets such as analytics warehouses or media libraries. Write endurance is limited by the read-intensive design, so workloads with sustained heavy writes will exceed the drive's rated limits.

特長

  • 68 TB capacity supports large datasets
  • 12 Gbps SAS interface delivers fast data transfer
  • Read-intensive TLC design suits heavy read workloads
  • 5 inch form factor fits standard drive bays
  • Compatible with numerous Dell PowerEdge servers

仕様

BrandDell
Model84C40, MZILT7T6HALAAD3
InterfaceSAS

この商品に関する質問

How often will the 7.68 TB TLC NAND in this PM1643a need replacement under read-intensive workloads?

Read-intensive TLC is rated for low write cycles, so the drive typically lasts the server refresh cycle without NAND replacement.

What limits sustained throughput first on the 12 Gbps SAS link?

The 12 Gbps SAS interface sets the maximum sustained bandwidth ceiling for the PM1643a.

How much heat does the 2.5-inch 7.68 TB SSD produce during all-day operation?

The 2.5-inch form factor and read-intensive firmware keep power draw low, so heat output stays minimal in a ventilated bay.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。