暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive in Dell server caddy

DELL

DELL AL14SEB120N 1.2TB 10000RPM SAS 12G 128MB 2.5" internal hard drive

SKU CH-K9C8-K2TVS

2.5-inch SAS drive with 1.2TB capacity, 10000RPM speed and 128MB cache for PowerEdge Gen13 servers

  • 2 TB capacity for large data sets
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 128 MB cache to accelerate transfers
  • 5 inch form factor fits PowerEdge Gen13 servers

1.2 TB SAS drive for PowerEdge Gen13

The Dell AL14SEB120N is a 2.5-inch internal hard drive built for PowerEdge Gen13 servers. It provides 1.2 TB of capacity and connects through a SAS 12Gb/s interface. The drive fits directly into the supplied caddy or tray for supported chassis.

Sustained 10000 RPM operation

A 10000 RPM spindle speed and 128 MB cache keep throughput steady during continuous workloads. The SAS 12Gb/s link maintains bandwidth without the drops seen on slower interfaces. Mechanical latency stays predictable across long read and write sequences.

SAS 12Gb/s interface requirement

This drive only works in systems that accept a 2.5-inch SAS 12Gb/s device. Servers without a compatible SAS backplane or controller cannot use it. Buyers who need a different interface or larger capacity must select another model.

特長

  • 2 TB capacity for large data sets
  • 10 000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 128 MB cache to accelerate transfers
  • 5 inch form factor fits PowerEdge Gen13 servers

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much heat does the 10000RPM SAS drive add when running continuously?

The 10000RPM spindle and 12Gb/s SAS interface draw more power than slower drives, so expect higher sustained heat output in a 2.5" bay.

Which server backplane or controller must I already have for the 12Gb/s SAS interface to work?

A 12Gb/s SAS backplane or HBA in a compatible GEN13 PowerEdge such as the R630 or R730xd is required for the drive to negotiate full speed.

Will the 12Gb/s SAS drive negotiate down to 6Gb/s on an older GEN12 backplane I plan to keep?

Yes, the SAS interface auto-negotiates to 6Gb/s on legacy backplanes, but the 10000RPM drive will still need a 2.5" bay and proper caddy.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。