暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch hard drive with black tray attached

DELL

DELL FNW88 ST1000NM0023 1TB 7200RPM SAS 6Gb/s 128MB 3.5" internal hard drive ZERO HOURS

SKU CH-KC6R-1M4PA

A 1 TB 3.5" SAS hard drive spinning at 7200 RPM with 128 MB cache, supplied new with zero hours and an R-series caddy

  • 1TB capacity stores large datasets
  • 7200RPM spindle speed accelerates data access
  • SAS 6Gb/s interface supports enterprise workloads
  • 128MB cache buffers intensive I/O operations
  • Includes R Series caddy for direct 3.5" bay installation

Dell 1 TB SAS enterprise drive

The Dell FNW88 is a 3.5-inch internal hard drive with 1 TB capacity, 7200 RPM spindle speed and a 6 Gb/s SAS interface. It ships new with zero hours and includes an R-series caddy for compatible Dell chassis. The 128 MB cache supports sustained throughput in multi-drive arrays.

Suited for SAS servers and arrays

This drive fits servers and storage enclosures that accept 3.5-inch SAS drives and provide the matching backplane or controller. It is not for systems that lack a SAS host bus adapter or that only offer 2.5-inch bays. Builders needing higher capacity or a different form factor should consider other models.

6 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 6 Gb/s SAS interface; the drive must connect to a SAS controller or backplane that supports this speed. Without that connection the drive cannot be used, regardless of capacity or spindle speed.

特長

  • 1TB capacity stores large datasets
  • 7200RPM spindle speed accelerates data access
  • SAS 6Gb/s interface supports enterprise workloads
  • 128MB cache buffers intensive I/O operations
  • Includes R Series caddy for direct 3.5" bay installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the included R Series caddy fit a standard 3.5" drive bay?

Yes, the supplied R Series caddy is built for a standard 3.5" bay and holds the ST1000NM0023 securely.

What is the most common mistake when installing this SAS drive?

Forgetting to connect both the SAS data cable and the separate power connector before securing the caddy.

When should the 128MB cache drive be replaced in a RAID array?

Replace it if SMART reports reallocated sectors or if the array controller flags the ST1000NM0023 as degraded.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。