暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
2.5 inch SAS hard drive in black metal caddy

DELL

DELL MK3001GRRB 300GB 15K RPM 6Gb/s 2.5" SAS internal hard drive

SKU CH-5JEK-CT3SR

A 300 GB, 15 000 RPM SAS drive with 32 MB cache and included 2.5" caddy

  • Enterprise 15,000 RPM SAS speed for rapid data access
  • 300 GB capacity supports demanding server workloads
  • 32 MB cache boosts burst transfer performance
  • 5 inch SAS 6Gb/s interface fits dense drive bays
  • Includes R Series caddy for direct Dell server installation

300 GB 15 K RPM SAS drive

This 2.5-inch SAS hard drive delivers 300 GB of storage on a 6 Gb/s interface with a 32 MB cache. The 15 000 RPM spindle speed targets high-transaction workloads in enterprise arrays. It ships in a factory-sealed R Series caddy ready for hot-swap bays.

Suits transaction-heavy servers, not bulk storage

Database servers and OLTP platforms that need low-latency random I/O will benefit from the spindle speed and SAS dual-port connectivity. Builders who need terabytes of inexpensive capacity or silent desktop operation should choose a different drive class.

Sustained enterprise workloads

The 15 000 RPM motor maintains consistent throughput during extended write-heavy batches, while the 32 MB buffer absorbs burst traffic without throttling. Dual-port SAS provides path redundancy so the drive stays online during controller or cable events.

特長

  • Enterprise 15,000 RPM SAS speed for rapid data access
  • 300 GB capacity supports demanding server workloads
  • 32 MB cache boosts burst transfer performance
  • 5 inch SAS 6Gb/s interface fits dense drive bays
  • Includes R Series caddy for direct Dell server installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my server or workstation need a 2.5" SAS 6Gb/s backplane or HBA to use the MK3001GRRB?

Yes, the drive uses a 2.5" SAS 6Gb/s interface and requires a compatible SAS backplane or host bus adapter; the included R Series caddy fits Dell PowerEdge bays designed for that connector.

Can the 15000RPM MK3001GRRB share a SAS backplane with older 2.5" SAS drives that run at 3Gb/s?

The drive supports 6Gb/s SAS and will negotiate down to 3Gb/s on a legacy backplane, so it can operate alongside slower 2.5" SAS drives on the same controller.

How can I confirm the MK3001GRRB is running at its rated 15000RPM after installation?

Check the drive’s reported rotational speed in the RAID controller BIOS, iDRAC, or SMART data — it should show 15000RPM and a 6Gb/s link rate if the SAS connection is healthy.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。