暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch internal hard drive with SAS connector

DELL

DELL NTF0R 6TB 7.2K SAS 3.5" 12Gb/s internal hard drive

SKU CH-FT7X-DK0GZ MPN NTF0R

A 6 TB enterprise-class SAS drive spinning at 7,200 RPM in a 3.5-inch form factor with a 12 Gb/s interface

  • 6 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • 12 Gb/s SAS interface enables fast host transfers
  • 5 inch form factor fits standard drive bays
  • New enterprise-class drive built for continuous operation

Enterprise 6 TB SAS drive

The Dell NTF0R is a 6 TB internal hard drive built for desktop and server bays that accept 3.5 inch SAS devices. It spins at 7200 RPM and connects through a 12 Gb/s SAS interface, delivering consistent throughput for bulk storage workloads. The drive ships new in a 13GEN kit ready for installation.

Suited for high-capacity arrays.

This drive fits storage arrays, backup targets and archive volumes where capacity and reliability matter more than low latency. Systems that require solid-state response times or a SATA-only controller will not benefit from this SAS model.

12 Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12 Gb/s SAS interface; the host must provide a SAS backplane or controller that supports this speed. Without a compatible SAS connection the drive cannot operate.

特長

  • 6 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • 12 Gb/s SAS interface enables fast host transfers
  • 5 inch form factor fits standard drive bays
  • New enterprise-class drive built for continuous operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my system need a 12 Gb/s SAS controller to run this NTF0R drive?

Yes, the drive uses a 12 Gb/s SAS interface and requires a compatible controller or HBA that supports that speed for full performance.

Can I keep my existing 6 Gb/s SAS backplane when adding this 7.2K RPM drive?

The NTF0R will operate on a 6 Gb/s SAS backplane, but the 12 Gb/s link speed will drop to the backplane's 6 Gb/s limit.

How can I confirm the NTF0R is recognised at 12 Gb/s after installation?

Check the controller BIOS or OS utility — it should report the drive at 12 Gb/s link speed and show the 6 TB capacity with 7200 RPM spindle.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。