暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive with green circuit board visible

DELL

DELL RMCP3 1.2TB 10K SAS 2.5" internal hard drive

SKU CH-W5C5-PDF51

A 1.2 TB 10 000 RPM SAS drive with 6 Gbps transfer and 4.5 ms seek time for 2.5 inch bays

  • InterfaceSAS
  • Capacity1.2TB
  • Form Factor2.5"
  • 2TB capacity stores large datasets
  • 10,000 RPM spindle speed delivers fast data access
  • SAS 6Gbps interface enables reliable enterprise connectivity
  • 5-inch form factor fits dense server bays
  • Hot-swap support allows drive replacement without downtime

What this drive is and who it fits

The Dell RMCP3 is a 1.2TB 10K SAS hard drive in a 2.5 inch form factor. It is built for servers or workstations that need fast rotational storage in a compact bay. The 6 Gbps SAS interface suits direct-attached arrays or JBOD enclosures. Hot-swap capability makes it practical for environments where drives are replaced without powering down.

What to check on your existing setup

Verify the host system has a SAS controller or backplane that supports 6 Gbps links and 2.5 inch drive carriers. The chassis must provide the correct power and signal connectors for SAS drives. Confirm the operating system or RAID firmware recognises 1.2TB volumes and 10000 RPM spindle speeds. This drive will not operate on a SATA-only controller.

What the included features change

Hot-swap support lets administrators pull and insert the drive while the system runs, reducing downtime during maintenance. The 10000 RPM spindle and 4.5 ms seek time accelerate random I/O for databases or virtualisation workloads. The 6 Gbps SAS link delivers consistent throughput for sequential workloads such as backup targets or media ingest. No additional software or mounting brackets are bundled.

特長

  • 2TB capacity stores large datasets
  • 10,000 RPM spindle speed delivers fast data access
  • SAS 6Gbps interface enables reliable enterprise connectivity
  • 5-inch form factor fits dense server bays
  • Hot-swap support allows drive replacement without downtime

仕様

BrandDell
ModelRMCP3
InterfaceSAS
Capacity1.2TB
Form Factor2.5"

この商品に関する質問

Does the Dell RMCP3 1.2TB 10K SAS drive ship with a mounting bracket or caddy, or must I purchase one separately?

The drive is sold as a bare 2.5" unit; no bracket, caddy, screws or cables are included. You will need a compatible 2.5" SAS tray or adapter for your server or enclosure.

My chassis only accepts 6 Gbps SAS — will this 1.2TB 10K model negotiate down to that speed?

Yes. The drive's external transfer rate is 6 Gbps SAS, so it matches your backplane without any speed negotiation required.

With a 4.5 ms seek time and 10000 RPM spindle, what kind of random I/O latency should I expect in a typical RAID array?

The 4.5 ms average seek and 10K RPM combine to deliver low single-digit millisecond latency for random reads, making it well suited for transaction-heavy workloads.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。