暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
2.5 inch SAS hard drive in silver caddy tray

DELL

DELL RWR8F ST2400MM0159 2.4TB SAS 2.5" 10K RPM 12Gb/s GEN13 internal hard drive

SKU CH-NH1D-D7GSN

2.4 TB SAS drive spins at 10 000 RPM with 256 MB cache and includes a Gen 13 PowerEdge caddy

  • 4TB capacity stores large enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache accelerates frequent read and write operations
  • Includes Gen13 PowerEdge caddy for direct server installation

Dell RWR8F 2.4TB 10K SAS drive

The Dell RWR8F is a 2.4TB enterprise hard drive spinning at 10,000RPM with a 12Gb/s SAS interface and a 256MB cache. It uses a 2.5-inch form factor and includes a Gen13 PowerEdge caddy for direct installation.

Suited for Gen13 PowerEdge servers

This drive fits Dell PowerEdge R230, R330, R430, R530XD, R630, R730, R730XD, R830 and R930 servers. It is not for systems that lack a 12Gb/s SAS backplane or cannot accept a hot-swap 2.5-inch tray.

12Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12Gb/s SAS connection; the server backplane must support this speed and the 2.5-inch hot-swap form factor for the drive to function.

特長

  • 4TB capacity stores large enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 12Gb/s SAS interface enables high-speed host connectivity
  • 256MB cache accelerates frequent read and write operations
  • Includes Gen13 PowerEdge caddy for direct server installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What does the 12Gb/s SAS interface cap in practice?

The 12Gb/s SAS link runs at its full rated speed when the drive is installed in a compatible 12Gb/s backplane or controller.

What physical space and mounting does the 2.5" drive need?

The drive fits a standard 2.5-inch bay and ships with a GEN13 PowerEdge caddy that slides directly into the hot-swap tray of supported servers.

How is the drive installed and what step is often missed?

Insert the caddied drive into the hot-swap bay until the latch clicks; the step often missed is fully seating the latch to engage the SAS connector and lock the drive in place.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。