暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL SAVVIO 10K.6 900GB 10000RPM SAS 64MB 2.5" internal hard drive with caddy

SKU CH-48CD-65DQQ

900 GB enterprise hard drive spins at 10000 RPM with 64 MB cache and SAS 6 Gb/s interface for Dell PowerEdge servers

  • 900 GB capacity supports data-intensive server workloads
  • 10000 RPM spindle speed reduces latency for transactional applications
  • SAS 6 Gb/s interface enables high-throughput connectivity
  • 64 MB cache buffers bursts for consistent performance
  • Includes PowerEdge caddy for direct installation in listed servers

Enterprise SAS drive for server arrays

The DELL SAVVIO 10K.6 is a 2.5-inch internal hard drive built for PowerEdge servers. It connects through a 6Gb/s SAS interface and spins at 10000RPM with a 64MB cache. The drive ships with a compatible caddy for direct installation in listed chassis.

900GB capacity with 10000RPM throughput

The 900GB capacity suits databases, virtualization hosts and logging workloads that need consistent random I/O. The 6Gb/s SAS link and 64MB buffer sustain high queue depths, but sequential transfers will saturate below the speeds of solid-state alternatives.

Replaces slower 2.5-inch SAS spindles in PowerEdge

The drive fits servers such as the R610, R710, R720, M610 and T610 without adapter changes. It is not for desktop PCs or consumer NAS units that lack SAS backplanes and enterprise firmware support.

特長

  • 900 GB capacity supports data-intensive server workloads
  • 10000 RPM spindle speed reduces latency for transactional applications
  • SAS 6 Gb/s interface enables high-throughput connectivity
  • 64 MB cache buffers bursts for consistent performance
  • Includes PowerEdge caddy for direct installation in listed servers

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 2.5" SAS 6Gb/s drive fit and run in my existing PowerEdge R610 backplane without an adapter?

The drive uses a standard 2.5" SAS 6Gb/s interface and includes the PowerEdge caddy, so it installs directly into supported servers such as the R610.

How can I confirm the ST900MM0006 is spinning at 10000RPM and recognised at 6Gb/s after installation?

Check the server BIOS or RAID controller utility — it will show the model ST900MM0006, 900GB capacity, 10000RPM speed and a negotiated 6Gb/s SAS link rate.

Does the package include only the bare drive or also the Dell 2RR9T caddy needed for hot-swap bays?

The listing states it includes the PowerEdge servers caddy/tray, so the drive ships mounted in the 2RR9T tray ready for hot-swap bays.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。