暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL ST1200MM0007 1.2TB 10000RPM 2.5 SAS 64MB internal hard drive

SKU CH-3ZT6-ZPWX2

Stores 1.2TB on a 2.5-inch SAS drive spinning at 10000RPM with 64MB cache and includes an R Series caddy

  • 2 TB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • Includes R Series caddy for direct 2.5 inch bay installation

Dell 1.2TB 10K SAS drive

This 1.2TB enterprise hard drive spins at 10000RPM and connects through a 2.5 SAS 6Gb/s interface with 64MB cache. It is built for servers and storage arrays that need fast sequential access and consistent low latency. The included R Series caddy allows direct installation in compatible Dell bays.

Thermals noise and power

The 2.5 inch form factor and 10000RPM spindle produce measurable heat and audible seek noise under sustained load. A 64MB buffer helps smooth burst transfers, reducing the time the heads spend active. Power draw rises during heavy random I/O, so adequate chassis airflow is required.

Bundled caddy benefit

The supplied R Series caddy removes the need to source a separate tray for Dell PowerEdge or Precision systems that use this mounting standard. It secures the drive firmly and aligns the SAS connector with the backplane. No additional software or firmware utilities are included with the hardware.

特長

  • 2 TB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6 Gb/s interface connects to enterprise controllers
  • Includes R Series caddy for direct 2.5 inch bay installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the ST1200MM0007 with the included R Series caddy into a 2.5" SAS bay?

Slide the drive into the supplied R Series caddy until the SAS connector seats firmly, then insert the caddy into the 2.5" bay and secure it with the chassis latch or screw; the step often missed is fully engaging the SAS data and power connector before locking the tray.

What maintenance or replacement will the 10000RPM SAS drive need over its service life?

The drive has no user-serviceable parts; plan to replace the unit once SMART attributes indicate excessive reallocated sectors or when the 1.2TB capacity no longer meets workload demands.

What is the first performance limit reached during sustained writes on the 6Gb/s SAS interface?

The 6Gb/s SAS link and 64MB buffer set the ceiling; sustained sequential throughput will plateau at the interface bandwidth before the 10000RPM platters become the bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。