暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dell 2.5 inch SAS hard drive in Gen14 server caddy

DELL

DELL ST1800MM0159 1.8TB 10K SAS 2.5" internal hard drive

SKU CH-S9RJ-YPMD1

A 1.8 TB 10 000 RPM SAS drive with 256 MB cache and a 2.5 inch form factor, supplied in a lot of 10 with Gen 14 server trays included

  • High-capacity 1.8TB storage for dense server workloads
  • Fast 10000RPM spindle speeds up data access
  • 12Gbps SAS interface delivers high-throughput connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Includes GEN14 caddy tray for direct server installation

Dell 1.8TB 10K SAS server drive

This Dell ST1800MM0159 is a new 1.8TB 2.5-inch internal hard drive spinning at 10000RPM with a 12Gbps SAS interface and 256MB cache. It ships in a lot of 10 with Gen14 caddies included for immediate installation.

Suits 14G PowerEdge bays only

The tray fits PowerEdge R340 R440 R540 R640 R740 R840 R940 R740XD R940xa R6415 R7415 R7425 C6420 servers. Builders using other generations or non-Dell chassis should look elsewhere because the caddy will not mount.

12Gbps SAS interface decides fit

Your backplane and controller must support 12Gbps SAS to use the full bandwidth. A 6Gbps-only system will work but at half speed. Verify the controller spec before purchase.

特長

  • High-capacity 1.8TB storage for dense server workloads
  • Fast 10000RPM spindle speeds up data access
  • 12Gbps SAS interface delivers high-throughput connectivity
  • 256MB cache buffers bursts for smoother I/O
  • Includes GEN14 caddy tray for direct server installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I fit the GEN14 caddy into a PowerEdge R640 bay?

Slide the 2.5 inch SAS drive into the supplied GEN14 caddy until the connector seats, then insert the assembly into the hot-swap bay until the latch clicks. The step often missed is securing the caddy screw before closing the chassis.

Which part of the ST1800MM0159 will need replacement first under heavy write workloads?

The mechanical spindle and actuator arms in a 10000RPM SAS drive wear before the 256MB cache or electronics, so plan for drive replacement once SMART reallocated-sector counts rise.

What performance limit appears first during sustained sequential writes on this 12Gbps SAS drive?

The 10000RPM rotational speed caps sustained throughput well below the 12Gbps interface ceiling, so the mechanical media transfer rate becomes the bottleneck first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。