暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive in black caddy tray

DELL

DELL ST300MM0006 300GB 10000RPM 6Gbps 64MB 2.5" SAS internal hard drive

SKU CH-SFSZ-T70JF

A 300 GB 2.5-inch SAS drive spinning at 10 000 RPM with a 64 MB cache, supplied new with a caddy tray

  • 300 GB capacity stores large enterprise datasets
  • 10,000 RPM spindle speed accelerates transaction-heavy workloads
  • 6 Gb/s SAS interface delivers reliable server connectivity
  • 64 MB cache buffers burst I/O for consistent throughput
  • 5-inch form factor with included caddy fits dense rack enclosures

300GB 10K SAS Enterprise Drive

This new 2.5-inch SAS hard drive delivers 300GB of storage at 10000RPM with a 6Gbps interface and 64MB cache. It ships with an R Series caddy for direct installation in compatible Dell servers. The unit reports zero operating hours from the manufacturer.

Suits SAS Bays Only

This drive fits servers and arrays that accept 2.5-inch SAS drives with a 6Gbps backplane. It is not suitable for systems that only provide 3.5-inch drive bays or a different interface. Buyers needing larger capacity or a different form factor should look at other models.

6Gbps SAS Interface Decides Fit

The single specification that determines compatibility is the 6Gbps SAS interface. Your controller or backplane must support this exact interface for the drive to function. Verify the interface before purchase.

特長

  • 300 GB capacity stores large enterprise datasets
  • 10,000 RPM spindle speed accelerates transaction-heavy workloads
  • 6 Gb/s SAS interface delivers reliable server connectivity
  • 64 MB cache buffers burst I/O for consistent throughput
  • 5-inch form factor with included caddy fits dense rack enclosures

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the 2.5" SAS drive into a 3.5" server bay using the included R Series caddy?

Slide the drive into the caddy, secure it with the four side screws, then insert the assembly into the hot-swap bay until the latch clicks.

What maintenance or replacement will the ST300MM0006 need after extended operation?

Mechanical wear on the 10000RPM spindle and SAS interface components eventually requires drive replacement; no user-serviceable parts are inside.

Which limit appears first during sustained heavy writes on this 6Gbps SAS drive?

The 6Gbps SAS interface bandwidth becomes the bottleneck before the 64MB cache or 10000RPM platters reach their maximum sustained rate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。