暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with black mounting tray

DELL

DELL ST3300657SS 300GB 3.5" SAS internal hard drive

SKU CH-0HEX-686CN MPN ST3300657SS

A 300 GB 3.5" SAS hard drive spinning at 15.7K rpm, supplied with a Dell tray for server or workstation storage

  • 300 GB capacity supports data-intensive workloads
  • 7K RPM spindle speed accelerates read and write operations
  • SAS interface delivers reliable enterprise connectivity
  • 5 inch form factor fits standard server bays
  • Includes Dell tray for direct installation

300 GB 3.5" SAS drive for Dell servers

This 300 GB drive uses a 3.5 inch form factor and a SAS interface. It is built for Dell PowerEdge systems that accept the F617N part number. The unit ships with a mounting tray for direct installation.

Sustained 15.7K RPM spindle speed

The spindle runs at 15.7K RPM continuously rather than only in short bursts. This maintains consistent throughput for database logs, transaction processing and other write-heavy workloads. The SAS link keeps command queuing efficient under load.

Verify SAS backplane and tray compatibility

Confirm the server backplane supports SAS drives and that the included tray matches your chassis slot design. Check the system service manual for the F617N part number before ordering. Ensure the controller firmware recognises the ST3300657SS model.

特長

  • 300 GB capacity supports data-intensive workloads
  • 7K RPM spindle speed accelerates read and write operations
  • SAS interface delivers reliable enterprise connectivity
  • 5 inch form factor fits standard server bays
  • Includes Dell tray for direct installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power and heat does the 15.7K RPM drive produce during continuous operation?

The Seagate Cheetah 15.7K 300GB SAS drive runs at high spindle speed, so it draws more power and generates more heat than slower drives; ensure your chassis has adequate airflow and a power supply rated for 3.5-inch enterprise drives.

What controller or backplane is required to connect this SAS drive?

This 3.5-inch SAS drive needs a SAS host bus adapter, RAID controller, or server backplane with a standard SAS connector and a drive bay that accepts the included tray.

Can the ST3300657SS share a SAS chain with older 3 Gb/s or 6 Gb/s drives?

Yes, SAS is backward compatible, so this drive will negotiate down to the speed of the slower devices on the same controller or expander.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。