暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL ST600MP0005 600GB 15K RPM 12Gb/s 2.5" SAS internal hard drive with caddy

SKU CH-RSW9-FN802

High-performance 600 GB 15,000 RPM SAS drive with hot-swap caddy for PowerEdge Gen 13 servers

  • 600 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • 12 Gb/s SAS interface enables high-throughput transfers
  • 5 inch hot-swap form factor fits Gen13 PowerEdge bays
  • Compatible with R330 R430 R530 R630 R730 R730xd R930 T330 T430 T530 T630 servers

Dell GEN13 600GB 15K SAS Drive

This Dell GEN13 internal hard drive delivers 600GB capacity at 15000RPM over a 12Gb/s SAS interface. The 2.5-inch form factor fits hot-swap bays in compatible PowerEdge GEN13 servers. It ships new with a caddy for direct installation.

Suits GEN13 PowerEdge Servers

This drive suits administrators upgrading or replacing storage in listed PowerEdge GEN13 models such as the R330, R430, R530, R630, R730, R730xd, R930, T330, T430, T530 and T630. Buyers needing a different interface or a non-hot-swap form factor should look at other parts.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface. Only systems with a matching SAS backplane and controller can use this drive. Verify the server model against the supported list before purchase.

特長

  • 600 GB capacity stores large datasets
  • 15000 RPM spindle delivers fast data access
  • 12 Gb/s SAS interface enables high-throughput transfers
  • 5 inch hot-swap form factor fits Gen13 PowerEdge bays
  • Compatible with R330 R430 R530 R630 R730 R730xd R930 T330 T430 T530 T630 servers

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 12Gb/s SAS drive negotiate down to 6Gb/s on my Gen12 backplane?

The drive uses a 12Gb/s SAS interface and will auto-negotiate to 6Gb/s when installed in a Gen12 chassis, but it is validated for the listed Gen13 PowerEdge servers.

How can I confirm the 15000RPM spindle is spinning correctly after installation?

The drive will appear in the RAID controller BIOS or iDRAC with the correct 600GB capacity and SAS link speed; SMART data will show zero reallocated sectors on a new unit.

Does the 2.5in caddy ship attached, or do I need a separate tray for my R730?

The product includes the Dell hot-swap caddy pre-mounted on the drive, so no additional tray is required for the compatible PowerEdge models.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。