Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Dynatron
A 77mm dual-ball-bearing PWM fan on a copper-base, aluminium-fin heatsink with embedded heatpipes cools supported Intel Core i3, i5.
The Dynatron K555 is a 77mm air cooler built for Intel Core i3, i5 and i7 processors from the first Core generation plus Xeon 3400 series chips. It fits sockets used by models such as the i3-530, i5-750 and i7-870. Builders working on newer platforms cannot use this cooler.
The 4-pin PWM fan spins from 1000 RPM at low duty cycle to 4500 RPM at full speed, delivering 10.12 to 45.56 CFM with noise between 13.14 and 45.8 dBA. That airflow range decides whether the cooler can handle the thermal load of the supported CPUs.
A copper base with embedded heatpipes and aluminium fins weighs 460g and measures 94.0 by 87.5 by 67.7mm. The 77 by 77 by 20mm two-ball-bearing fan attaches directly to the heatsink. No extra brackets, paste or software are included.
| Brand | Dynatron |
|---|---|
| Model | K555 |
| Type | Fan & Heatsinks |
| Fan Size | 77mm |
| Bearing Type | 2 Ball |
| RPM | At Duty Cycle 0~20%: 1000 RPM At Duty Cycle 50%: 2500 RPM At Duty Cycle 100%: 4500 RPM |
| Air Flow | At Duty Cycle 0~20%: 10.12 CFM At Duty Cycle 50%: 25.30 CFM At Duty Cycle 100%: 45.56 CFM |
| Noise Level | At Duty Cycle 0~20%: 13.14 dBA At Duty Cycle 50%: 33.04 dBA At Duty Cycle 100%: 45.8 dBA |
| Power Connector | 4 Pin PWM |
| Heatsink Material | Copper Base & Aluminum Fins with Heatpipes embedded |
| Fan Dimensions | 77 x 77 x 20 mm |
| Heatsink Dimensions | 94.0 x 87.5 x 67.7mm |
| Weight | 460g ± 5g |
| Features | CPU Support: Intel Core i3 i3-530 & i3-540, Core i5 i5-650, i5-650, i5-660, i5-661 i5-670 & I5-750; Xeon Processor 3400 Series; Core i7 Processors, I7-870 & I7-860 |
| 配送重量 | 0.54 kg |
| 梱包サイズ | 108 × 108 × 64 mm |
At 100 percent duty cycle the fan moves 45.56 CFM at 4500 RPM, producing 45.8 dBA; the copper base and aluminium fins with embedded heatpipes transfer that airflow into heat dissipation for the supported Intel sockets.
The 4-pin PWM header lets the motherboard vary the duty cycle: 0 to 20 percent runs the fan at 1000 RPM and 10.12 CFM, 50 percent gives 2500 RPM and 25.30 CFM, and 100 percent reaches 4500 RPM and 45.56 CFM.
The heatsink measures 94.0 mm wide, 87.5 mm deep and 67.7 mm tall; combined with the 77 x 77 x 20 mm fan the total assembly weighs 460 g, so check your case CPU-cooler height limit and motherboard keep-out zones before fitting.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?