暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive in anti-static bag

Epoch

Epoch 400-ARVH 8TB 7200 RPM SATA 3.5" internal hard drive

SKU CH-X3X9-YRA4W

An 8 TB 3.5" SATA hard drive spinning at 7200 RPM, validated for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers fast sequential throughput
  • SATA 6 Gb/s interface fits standard 3.5″ drive bays
  • Validated across Dell PowerEdge 14 and 15 generation servers
  • Three-year warranty backed by genuine enterprise components

8TB SATA server storage

The Epoch 400-ARVH is an 8TB 3.5 inch internal hard drive spinning at 7200 RPM over a SATA 6Gb/s interface. It is supplied as a replacement kit and carries a three-year warranty with technical support. The drive is designed for continuous operation in enterprise environments.

Suited for Dell PowerEdge and Tower servers

This drive fits Dell PowerEdge 14 Generation servers such as the R240 through R940xa and 15 Generation servers including the R250 through R7525. It also matches Dell Tower 15 Generation models T150, T350 and T550. Builders needing a different interface or a smaller form factor should consider other options.

Installs in a 3.5 inch SATA bay

The unit mounts in any standard 3.5 inch drive bay with a SATA data and power connection. No additional controller or cabling is required beyond what the host server provides. Using this drive frees up M.2 or PCIe slots for other expansion cards.

特長

  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed delivers fast sequential throughput
  • SATA 6 Gb/s interface fits standard 3.5″ drive bays
  • Validated across Dell PowerEdge 14 and 15 generation servers
  • Three-year warranty backed by genuine enterprise components

仕様

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

Does my server need a free 3.5" drive bay and a SATA cable to install this 8TB 7200 RPM drive?

Yes, the drive uses a standard 3.5" form factor and a SATA 6Gb/s interface, so an available 3.5" bay and a SATA data plus power connection are required.

Will this SATA 6Gb/s drive work in a Dell PowerEdge 14G server that only has SATA 3Gb/s backplanes?

The drive is compatible with the listed 14G and 15G PowerEdge models and will operate at the backplane's maximum speed; it negotiates down to 3Gb/s if the controller only supports that rate.

After fitting the drive, how can I confirm the 8TB capacity and 7200 RPM speed are recognised by the system?

Check the RAID controller BIOS or the operating system's disk management utility; both should report the full 8TB capacity and identify the drive as a 7200 RPM SATA device.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。