暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive in anti-static bag

Epoch

Epoch 4TB 7.2K SAS 12Gb/s 3.5" Hard Drive Kit

SKU CH-NBVW-6CNK4

A 4 TB SAS 12Gb/s 7200 RPM 3.5" drive kit for Dell PowerEdge 12, 13, 14 generation and Tower 12, 14 generation servers

  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 4TB capacity stores large server datasets
  • 7200 RPM delivers consistent throughput for RAID arrays
  • SAS 12Gb/s interface matches backplane bandwidth
  • 5" form factor fits standard drive bays
  • Compatible with 12, 13 and 14 generation PowerEdge and Tower servers

4TB SAS 12Gb/s Server Drive

The Epoch 4TB 3.5-inch hard drive kit uses a SAS 12Gb/s interface and spins at 7200 RPM. It is built for Dell PowerEdge 12, 13 generation and Tower 12, 14 generation servers. The kit suits administrators who need reliable bulk storage in compatible enterprise chassis.

Tray Installation and Firmware

Each drive ships in a carrier that matches the hot-swap bays of the listed Dell models so mounting is a simple slide-and-lock action. The most common issue is a controller that lacks current firmware, which can prevent the drive from negotiating the full 12Gb/s link speed.

Controller and Bay Compatibility

Before ordering, confirm that your server backplane and RAID controller support SAS 12Gb/s drives and that the chassis accepts 3.5-inch hot-swap trays. Systems limited to 6Gb/s or fixed non-hot-swap cages will not work with this kit.

特長

  • 4TB capacity stores large server datasets
  • 7200 RPM delivers consistent throughput for RAID arrays
  • SAS 12Gb/s interface matches backplane bandwidth
  • 5" form factor fits standard drive bays
  • Compatible with 12, 13 and 14 generation PowerEdge and Tower servers

仕様

InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

How do I verify the drive runs at 7200 RPM and connects at 12Gb/s after installation?

The drive will report 7200 RPM and a SAS 12Gb/s link speed in the server BIOS or RAID controller utility during POST.

What comes in the kit and do I need a separate caddy or cable?

The kit includes the 4TB 3.5" SAS drive; a server-specific hot-plug caddy or tray is required and sold separately.

Which Dell PowerEdge generation and model numbers are confirmed compatible?

Compatible models span PowerEdge 12G (R220–R920, T20–T620), 13G (R230–R930) and 14G towers (T40–T440).

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。