暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

Epoch

Epoch 8TB 7.2K SATA 3.5" internal hard drive replacement kit

SKU CH-QQWT-W5VQ5

An 8 TB, 7200 RPM SATA 3.5" drive built for Dell PowerEdge 12, 13 and 14 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface integrates with existing controllers
  • 5-inch form factor fits standard drive bays
  • Validated across Dell PowerEdge 12 13 14 generation servers

8TB 7.2K SATA drive for Dell PowerEdge servers

This 8TB 3.5-inch hard drive operates at 7200 RPM over a SATA 6Gb/s interface. It is supplied as a replacement kit designed for direct installation in compatible Dell PowerEdge and Tower servers. The drive is new and intended for enterprise storage workloads.

Suited for Dell 12G 13G 14G server bays

The kit fits Dell PowerEdge 12th, 13th and 14th generation rack and tower models including R220, R320, R420, R520, R620, R720, R720xd, R820, R920, R230, R330, R430, R530, R530xd, R630, R730, R730xd, R830, R930, T20, T320, T420, T620, T40, T140, T340 and T440. Builders needing a different interface or a smaller form factor should look elsewhere.

8TB capacity for bulk server storage

Eight terabytes provides substantial space for databases, virtual machine images and backup archives in a single bay. The 7200 RPM spindle delivers sustained throughput for sequential workloads, while the SATA link caps peak transfer at 6Gb/s. Workloads demanding higher IOPS or lower latency will exceed what this drive can deliver.

特長

  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface integrates with existing controllers
  • 5-inch form factor fits standard drive bays
  • Validated across Dell PowerEdge 12 13 14 generation servers

仕様

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

Does my server need a 3.5-inch SATA drive bay and a 6 Gb/s SATA controller for this 8 TB drive to work?

Yes, the drive fits a standard 3.5-inch SATA bay and connects via a SATA 6 Gb/s interface, so the server must provide both.

Will this 7200 RPM SATA drive work in a Dell PowerEdge 12G server that currently uses slower 7.2K drives?

It matches the 7200 RPM speed and SATA interface of existing 7.2K drives, so it will operate alongside them without speed mismatch.

How can I confirm the 8 TB capacity is recognised after installing the drive in a Dell PowerEdge 13G system?

Check the RAID controller BIOS or the operating system disk management utility; both should report the full 8 TB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。