EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
ESGAMING
A fully modular 1200W ATX power supply with 80 Plus Gold efficiency, native 12V-2x6 cable for 600W GPU power, 120mm FDB fan, Japanese 105°C capacitors, and six protection circuits
This 1200 watt fully modular unit meets ATX 3.1 and PCIe 5.1 specifications. A native 12V-2x6 cable supplies up to 600 watts directly to modern graphics cards. 80 Plus Gold certification guarantees better than 90 percent efficiency at typical loads. The compact 15 by 8 by 14 centimetre enclosure fits standard ATX cases.
A 120 mm fluid-dynamic-bearing fan runs a calibrated curve to limit noise even at full load. Active power factor correction and dual +12V rails deliver stable output across the 50 to 60 hertz input range. All primary capacitors are rated for 105 degrees Celsius for long-term reliability. Six protection circuits cover over-current, over-power, over-temperature, over-voltage, short-circuit and under-voltage events.
The supply replaces older units that lack a native 12V-2x6 connector or cannot sustain 600 watts on a single GPU cable. Fully modular cabling lets builders connect only the 24-pin ATX, two 6-pin PCIe and six SATA leads they need. The jump is worthwhile when moving to a graphics card that requires the new 12V-2x6 interface or when efficiency and cable management are priorities.
| Brand | ESGAMING |
|---|---|
| Series | 80 Plus |
| Model | 1200W |
| Color | Black |
| Type | ATX 12V |
| Maximum Power | 600 W |
| Fans | 2 |
| PFC | Active |
| Main Connector | 20+4 Pin |
| +12V Rails | 2 |
| PCI-Express Connector | 2 x 6-Pin |
| SATA Power Connector | 6 |
| Modular | Yes |
| Efficiency | > 90% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Input Frequency Range | 50/60 Hz |
| Output | 1200 watts |
| Connectors | 1 x 24 pin (20+4) ATX |
| Peak Power | 1200 watts |
| SLI | Certified |
| Approvals | not_applicable |
| Size/Dimensions | 15 cm x 8 cm x 14 cm |
| Dimensions | 20' |
| Weight | 4.4 pounds |
| Frequency Range | 50/60 Hz |
| 12V Power Connector | 12VHPWR |
| Floppy Connector | 1 |
| Peripheral Connector | 3 |
| Fans Total Quantity | 1 |
| Top Fans Size | 120mm |
| Rear Fans Size | 120mm |
| Features | 1200W, Full Modular, full, Air, ATX, 3 Years |
Mount the unit in the case, connect the 24-pin ATX cable to the motherboard, attach the native 12V-2x6 cable to the graphics card, and plug in the 6-pin PCIe and SATA cables as needed. The step often missed is seating every modular connector firmly on both the PSU side and the component side until it clicks.
The 120 mm FDB fan is the only moving part; dust it periodically with compressed air. The 105 °C-rated capacitors are rated for long life, but if the fan becomes noisy or airflow drops, replace the fan assembly to keep temperatures in check.
The 600 W maximum on the native 12V-2x6 cable is the first ceiling you will hit when a single graphics card draws continuous power. The overall unit can deliver 1200 W, but the dedicated GPU connector tops out at 600 W.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?