暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of dual-colour matte PLA filament in red and black, 1.75mm diameter

eSUN

eSUN Dual Color Matte PLA Filament 1.75mm 1KG Red Black 3d printers accessory

SKU CH-EHY6-P81W2

Dual-colour matte PLA filament on a 1.75 mm, 1 kg spool prints with a layered red-and-black finish, low warping and tangle-free feeding for most FDM printers

  • ColorRed and Black
  • Type3D Printing Filament

Color Red Black

  • Dual-colour matte finish adds visual depth without layer lines
  • Higher toughness than standard PLA resists cracking on functional parts
  • Tight diameter tolerance and low warping give reliable, consistent feeding
  • Tangle-free spool design prevents jams and keeps print success high
  • Recyclable spool and packaging reduce waste from each kilogram used

Dual-colour matte PLA for visual models

This 1.75 mm filament co-extrudes red and black material to give printed parts a layered colour effect without painting. The matte finish reduces visible layer lines compared with standard PLA, while the formulation keeps parts from becoming brittle. It is aimed at makers producing display pieces, cosplay props or decorative accessories where surface appearance matters.

Filament behaviour that eases printing

Tighter diameter tolerance and neat winding prevent tangles and nozzle clogs, so the extruder feeds smoothly through long jobs. Support structures separate cleanly from the model, cutting post-processing time. The spool and box are made from recycled plastic, reducing waste without changing the material properties.

Check nozzle size and bed adhesion first

Your printer must accept 1.75 mm filament and have a heated bed or adhesive method suited to PLA; otherwise first-layer warping can occur. The dual-colour effect appears only on geometries that expose both material streams, so purely single-wall prints will not show the contrast.

特長

  • Dual-colour matte finish adds visual depth without layer lines
  • Higher toughness than standard PLA resists cracking on functional parts
  • Tight diameter tolerance and low warping give reliable, consistent feeding
  • Tangle-free spool design prevents jams and keeps print success high
  • Recyclable spool and packaging reduce waste from each kilogram used

仕様

BrandeSun
ModelPLA Filament
ColorRed and Black
Type3D Printing Filament

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How often will I need to replace the 1.75mm spool during long print sessions?

Each spool holds 1KG of filament; replacement frequency depends on the model volume and infill settings you choose for each job.

What dimensional tolerance limit appears first when printing continuously?

The filament is manufactured with tight diameter tolerance and minimum warping to maintain consistent feeding during extended prints.

Does the extruder run hotter or louder when this matte PLA feeds all day?

The material melts smoothly and feeds constantly without clogging, so the extruder operates at normal PLA temperatures and noise levels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。