暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone CFast duplicator with one source and one target slot, 150MB/s copy speed

EZ Dupe, Inc.

EZ Dupe CFAST01TB150 1 to 1 CFast Duplicator 150MB/s

SKU CH-YG5Q-FS0MZ

Standalone CFast duplicator copies one card to another at 150MB/s with four copy modes and DoD-compliant erase functions

  • TypeCFAST Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Data Source ROM1 CFAST Slot for Source Reading
  • Data Destination Burner1 CFAST Slots for CFAST to CFAST Copy
  • ConnectorCFAST

Target 1 to 1

  • Standalone operation with no host computer required
  • 1-to-1 CFast card duplication at 150 MB/s
  • Four copy modes including quick and full media
  • Four erase modes including DoD 5220.22 compliant
  • 128 MB buffer memory for sustained throughput

Standalone CFast Duplicator

The EZ Dupe CFAST01TB150 is a standalone 1-to-1 CFast card duplicator and sanitiser. It copies or erases a single target card at up to 150 MB/s without a host computer. The unit uses an Athena controller with 128 MB buffer memory and operates from 115–230 V AC power. It is built for IT teams and forensic labs that need secure, portable media processing.

Replaces manual PC-based cloning

This duplicator removes the need to tie up a workstation for bit-for-bit CFast transfers. The jump is worth it when you need DoD-compliant sanitisation (3-pass 5220.22-M or 7-pass 5220.22-M ECE) alongside four copy modes including Partitioned Area and Percentage Copy. It is not for buyers who need simultaneous multi-target duplication or support for other card formats.

Slot-load operation with LCD menu

Insert source and target cards into the two CFAST slots and navigate the four-key panel with LCD to select copy or erase mode. No software installation or driver configuration is required. The main friction points are ensuring both cards are fully seated in the slot-load mechanism and verifying the correct erase standard before starting a sanitisation job.

特長

  • Standalone operation with no host computer required
  • 1-to-1 CFast card duplication at 150 MB/s
  • Four copy modes including quick and full media
  • Four erase modes including DoD 5220.22 compliant
  • 128 MB buffer memory for sustained throughput

仕様

BrandEZ Dupe
TypeCFAST Duplicator
ModelCFAST01TB150
Part NumberCFAST01TB150
Panel ColorBlack
Operating TypeStandalone
Data Source ROM1 CFAST Slot for Source Reading
Data Destination Burner1 CFAST Slots for CFAST to CFAST Copy
ConnectorCFAST
Target1 to 1
Buffer Memory128M
ControllerAthena Controller
Supported MediaCompactFAST (CFAST)
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesStandalone
FeaturesDuplication
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What power supply range does the CFAST01TB150 duplicator require?

The unit operates on AC 115-230 V at 50/60 Hz, so it works on standard mains voltages worldwide without a separate adapter.

How do I start a copy job on the standalone duplicator?

Insert the source CFast card into the single source slot and a blank target card into the destination slot, then use the four-key control panel with LCD to select one of the four copy modes and press start.

Which erase modes are available for sanitising CFast cards later?

Four erase modes are provided: Quick Erase for essential files, Full Erase for the whole media, DoD 3-pass compliant with 5220.22-M, and DoD 7-pass compliant with 5220.22-M ECE.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。