暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 80 mm case fan with transparent blades and central hub sticker

Fans

Fans AD0812UB-A70GL 8025 12V 0.30A 3400RPM case fan

SKU CH-BQZ7-Y4348 MPN AD0812UB-A70GL

80 mm axial fan moves 46.13 CFM at 3400 RPM with 35.2 dBA noise and 50,000-hour rated life

  • High airflow of 46.13 CFM cools components efficiently
  • Low noise at 35.2 DBA keeps systems quiet
  • 50,000 hour service life ensures long reliability
  • 12V 0.30A input draws only 3.6W power
  • Operates from -25 to 75 degrees Celsius environments

80 mm axial fan for industrial cooling

The AD0812UB-A70GL is an 80 mm by 25 mm axial fan built by Taiwan ADDA for 12 V DC systems. It draws 0.30 A and spins at 3400 RPM to deliver 46.13 CFM of airflow at 5.11 mmAq static pressure. Noise is rated at 35.2 dBA and the bearing is rated for 50,000 hours across a -25 °C to 75 °C range.

Replaces 80 mm fans below 40 CFM or 4 mmAq

Swapping in this unit makes sense when the existing 80 mm fan cannot move enough air through a restrictive heatsink or filter. The 3.6 W motor provides a measurable jump in pressure and volume without changing the mounting pattern or voltage rail.

Verify 12 V DC header and 80 mm mounting holes

Confirm the target device supplies 12 V DC on a two-wire or three-wire header and that the chassis has standard 80 mm screw centres. The fan operates continuously between -25 °C and 75 °C, so ensure the enclosure ambient stays within that window.

特長

  • High airflow of 46.13 CFM cools components efficiently
  • Low noise at 35.2 DBA keeps systems quiet
  • 50,000 hour service life ensures long reliability
  • 12V 0.30A input draws only 3.6W power
  • Operates from -25 to 75 degrees Celsius environments

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 80 mm by 80 mm by 25 mm frame fit my standard 80 mm fan mount?

The fan measures 80 mm by 80 mm by 25 mm, matching the common 80 mm square mounting pattern used in many chassis.

How do I connect the 12 V 0.30 A power leads without damaging the fan?

Connect the two DC leads to a 12 V source rated for at least 0.30 A, observing the marked polarity; reversing the wires can stall the motor.

When should I plan to replace a fan rated for 50,000 hours of service life?

At continuous operation the 50,000 hour rating equals roughly 5.7 years; replace it if noise rises above 35.2 dBA or airflow drops below 46.13 CFM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。