暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square black 80mm case fan with four-wire PWM connector

Fans

Fans DYTB0838B8UBearing 80x80x38mm 48V 0.63A 4P PWM case fan

SKU CH-8ZGJ-1DPRB MPN DYTB0838B8UBearing

80 x 80 x 38 mm case fan with 48 V PWM control and double ball bearing

  • PWM control adjusts speed to thermal load
  • Double ball bearing extends operational lifespan
  • 48 V 0.63 A suits industrial power rails
  • 80 × 80 × 38 mm fits standard 80 mm mounts
  • Four‑wire interface enables precise speed monitoring

80×80×38 mm 48 V PWM case fan

This 80 mm axial fan runs on 48 V DC and draws 0.63 A through a four-pin PWM connector. Double ball bearings support continuous rotation in industrial and embedded chassis. The 38 mm thickness fits standard 8038 mounting holes.

Suited for 48 V industrial rails

The 48 V supply requirement suits rail vehicles, medical equipment, new-energy vehicles and telecom cabinets that already distribute 48 V DC. Builders using 12 V or 24 V motherboard headers cannot power this fan without a separate converter.

Steady airflow under PWM control

PWM input lets the fan scale speed to thermal load while the tachometer wire reports RPM to the controller. Double ball bearings maintain consistent speed and acoustic profile during long duty cycles in drive cooling or hotel automation racks.

特長

  • PWM control adjusts speed to thermal load
  • Double ball bearing extends operational lifespan
  • 48 V 0.63 A suits industrial power rails
  • 80 × 80 × 38 mm fits standard 80 mm mounts
  • Four‑wire interface enables precise speed monitoring

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What power source do I need for the 48 V 0.63 A rating of this DYTB0838B8U fan?

You need a 48 V DC supply capable of at least 0.63 A. The fan draws its power directly from that rail through the 4-pin connector.

Will the 4-pin PWM connector work with a motherboard header that only supports 3-pin voltage control?

The 4-pin plug fits a 3-pin header; the fan will run at full speed because the PWM pin is not driven. Speed reporting via the tach wire still functions.

How can I confirm the double-ball-bearing fan is reporting speed correctly after installation?

Check the RPM reading in BIOS or monitoring software; it should vary smoothly with the PWM duty cycle and show no erratic jumps.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。