暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black square case fan forty by forty by twenty-eight millimetres with short cable

Fans

Fans MGT4012VB-028Voltage 12V 0.8A 40x40x28mm case fan

SKU CH-FBP3-TEA2T MPN MGT4012VB-028Voltage

A 40 mm square, 28 mm deep case fan with a double ball bearing that runs on 12 V and draws 0.8 A for 9.6 W of cooling power

  • Double ball bearing extends fan lifespan
  • 12V 0.8A delivers 9.6W cooling power
  • Compact 40x40x28mm fits tight spaces
  • 4cm cable simplifies internal routing
  • Suitable for industrial and embedded applications

40×40×28 mm 12 V case fan

This 40 mm square frame fan is 28 mm thick and runs on 12 V at 0.8 A for 9.6 W. It uses a double ball bearing and ships with a 4 cm cable ending in a standard fan interface. The supplier lists it for medical, rail, industrial and vehicle cooling applications.

Builders needing a compact 12 V axial fan

Suits tight enclosures that accept a 40×40×28 mm footprint and a 4 cm lead. Not for systems requiring PWM speed control, larger airflow volumes, or longer cable reaches. Buyers who need a different voltage, bearing type or mounting pattern should look elsewhere.

Check voltage, mounting holes and header

Verify the board or controller supplies 12 V and can deliver 0.8 A on the fan header. Confirm the chassis has 40 mm mounting centres and enough clearance for the 28 mm depth. Ensure the 4 cm cable can reach the header without extension.

特長

  • Double ball bearing extends fan lifespan
  • 12V 0.8A delivers 9.6W cooling power
  • Compact 40x40x28mm fits tight spaces
  • 4cm cable simplifies internal routing
  • Suitable for industrial and embedded applications

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What fan header voltage must my motherboard provide for this 12V fan?

The fan requires a standard 12V fan header; the motherboard must supply 12V to match the fan's rated voltage.

Can I run this double ball bearing fan on a 5V header to reduce noise with older components?

No, the fan is rated for 12V operation at 0.8A; running it from a 5V header would not provide the correct voltage.

How can I verify the fan is spinning correctly after connecting the 4cm cable?

Check that the fan spins smoothly and listen for steady airflow; the double ball bearing should run without grinding or rattling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。