暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square 40mm black frame axial fan 28mm deep two wire lead

Fans

Fans P6244028HB2F 24V .158A 40x40x28mm case fan

SKU CH-0J72-31MWG

A 40 × 40 × 28 mm case fan running on 24 V DC with a 0.158 A draw and ball-bearing motor

  • 24 V DC power suits industrial and embedded systems
  • 40 x 40 x 28 mm footprint fits tight 4028 chassis slots
  • Ball bearing construction extends operating life in continuous duty
  • Low 0.158 A draw reduces load on 24 V rails
  • Original PSC SELECT build ensures authentic specification compliance

40×40×28 mm DC fan for 24 V systems

This 40 mm square axial fan measures 28 mm thick and runs on 24 V DC at 0.158 A. It uses a ball-bearing design and is built to the P6244028HB2F specification. The compact frame suits tight equipment bays where a 4028 footprint is required.

Replaces worn 24 V 4028 ball-bearing fans

Swap this unit in when an existing 24 V 40×40×28 mm fan develops bearing noise or reduced airflow. The jump is worth it when the original has failed or when a maintenance schedule calls for a fresh ball-bearing assembly in the same voltage and frame size.

Suits integrators needing a direct-fit 24 V 4028

Technicians servicing medical, rail, industrial or telecom gear that specifies this exact model will find a drop-in match. Builders who need a different voltage, a larger frame, PWM control or a different connector should look elsewhere.

特長

  • 24 V DC power suits industrial and embedded systems
  • 40 x 40 x 28 mm footprint fits tight 4028 chassis slots
  • Ball bearing construction extends operating life in continuous duty
  • Low 0.158 A draw reduces load on 24 V rails
  • Original PSC SELECT build ensures authentic specification compliance

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What clearance does the 40x40x28mm frame need to fit inside a case?

The fan measures 40 mm square and 28 mm deep, so allow at least that footprint plus a few millimetres for the lead wires and any mounting screws.

How do I mount the P6244028HB2F and what step is often missed?

Use four 3 mm screws through the corner holes; the step people miss is orienting the airflow arrow toward the component that needs cooling.

When should the ball-bearing fan be replaced?

Listen for new rattling or a drop in airflow; when either appears, swap the 24 V 0.158 A unit for a fresh P6244028HB2F.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。