暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square black 60 mm frame 38 mm deep axial fan with central hub and curved blades

Fans

Fans PMD2406PMB2-A 60×60×38 mm 24 V 10.3 W 8000 RPM 57 CFM case fan

SKU CH-7826-3N3KE MPN PMD2406PMB2-A

A 60 mm square, 38 mm thick axial fan moves 57 CFM at 8000 RPM from a 24 V supply while drawing 10.3 W

  • Compact 60×60×38 mm footprint saves chassis space
  • 24 V 10.3 W design limits power draw
  • 8000 RPM delivers 57 CFM airflow
  • 92 Inch-H2O pressure overcomes restrictive grills
  • Ball bearing rated for long service life

Targeted 60×60×38 mm airflow for tight industrial

This 24 V axial fan delivers 57 CFM at 8000 RPM from a 60×60×38 mm frame, drawing 0.43 A and 10.3 W. It suits equipment builders who need directed cooling in shallow enclosures where larger fans cannot fit.

Sustained 8000 RPM output

Ball-bearing construction maintains the rated 8000 RPM and 57 CFM continuously, producing 0.92 Inch-H2O pressure to push air through dense heatsinks or filters. Acoustic output settles at 56 dBA under full load, reflecting the high-speed design rather than a defect.

Two-wire 24 V connection.

The fan mounts with standard 60 mm hole spacing and requires a 24 V DC supply capable of at least 0.43 A. Installers must confirm the chassis can accommodate the 38 mm depth and that the 56 dBA noise level is acceptable for the deployment environment.

特長

  • Compact 60×60×38 mm footprint saves chassis space
  • 24 V 10.3 W design limits power draw
  • 8000 RPM delivers 57 CFM airflow
  • 92 Inch-H2O pressure overcomes restrictive grills
  • Ball bearing rated for long service life

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How loud is the 56 dBA noise level when this fan runs continuously at 8000 RPM?

At 56 dBA the fan produces a noticeable but moderate airflow sound typical for a 60 × 60 mm high-speed cooler running all day.

Does the 24 V 0.43 A power input require a specific connector or adapter I must already have?

The fan draws 10.3 W at 24 V and 0.43 A, so a 24 V DC source with a compatible two-pin or three-pin header is needed.

Will the 60 × 60 × 38 mm frame and 57 CFM airflow fit the mounting holes and cooling needs of my older 6038 chassis?

The 60 mm square footprint matches legacy 6038 mounts, and 57 CFM at 0.92 Inch-H2O pressure suits typical older heat-exchanger layouts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。