暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Fans

Fans SF11580 1083HSL 8038 115V case fan

SKU CH-7XF3-91T04

An 80 mm by 38 mm axial case fan running on 115 V at 0.13 A with 36.5 dB(A) noise

  • Quiet operation at 36.5 dB(A) for low-noise environments
  • 115 V AC supply with 0.13 A draw for standard power
  • Compact 80 × 80 × 38 mm frame fits tight chassis
  • Axial airflow design moves air efficiently through heat exchangers
  • Lightweight 0.75 lbs construction eases installation and reduces load

115 V AC axial chassis fan

This SUNON SF11580 1083HSL 8038 axial fan runs on 115 V AC mains voltage and draws 0.13 A. Its frame measures 80 x 80 x 38 mm and weighs 0.75 lbs. The motor produces 36.5 dB(A) of noise while delivering forced electronic cooling for industrial chassis and enclosures.

Suited for AC-powered enclosures; not for DC headers

Installers wiring 115 V AC distribution boxes or legacy server chassis will find the voltage a direct match. Builders who need a fan powered from a motherboard header or a low-voltage DC supply cannot use this unit because the motor requires mains voltage.

115 V AC input voltage

The single specification that decides fitment is the 115 V AC rating. If your chassis provides 115 V AC at the fan mount, the fan will operate; if the mounting point supplies any other voltage, the part is incompatible.

特長

  • Quiet operation at 36.5 dB(A) for low-noise environments
  • 115 V AC supply with 0.13 A draw for standard power
  • Compact 80 × 80 × 38 mm frame fits tight chassis
  • Axial airflow design moves air efficiently through heat exchangers
  • Lightweight 0.75 lbs construction eases installation and reduces load

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the SF11580 1083HSL 8038 require a 115V AC power source to operate?

Yes, this fan runs on 115V AC and draws 0.13A, so it must be connected to a mains-voltage supply or a compatible 115V fan header.

Can the 80mm x 80mm x 38mm frame fit in the same mounting holes as my older 80mm fans?

The fan uses the standard 80mm square footprint with 38mm depth, matching the common mounting pattern used by most 80mm chassis fans.

How do I confirm the fan is spinning at full speed after installation?

Listen for the rated 36.5 dB(A) noise level and verify airflow through the chassis; the fan runs at a fixed speed when powered from 115V AC.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。