暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Large black axial fan with five blades and metal housing

Fans

Fans W4D500-GD03-01Motor 500mm 400V 550W case fan

SKU CH-XCGD-RBHG1 MPN W4D500-GD03-01Motor

An axial fan with a 500 mm blade diameter runs at 1180 or 1640 rpm on 400 to 460 V three-phase power

  • Axial airflow delivers 500 mm blade cooling for dense equipment
  • 400 V three-phase supply powers 550 W motor in industrial racks
  • IP54 rating protects internals from dust and water splashes
  • Dual-speed motor runs at 1180 or 1640 rpm for variable thermal loads
  • Five-blade design balances static pressure and acoustic output

500 mm 400 V industrial axial fan

The Fans W4D500-GD03-01Motor is a 500 mm diameter axial fan built by ebmpapst for industrial and commercial cooling. It runs on 400-460 V three-phase power at 50-60 Hz and delivers two motor-power steps of 550 W and 1060 W with matching speeds of 1180 rpm and 1640 rpm. The unit carries IP54 protection and uses a five-blade rotor.

Suited for equipment builders and maintenance teams

This fan fits designers of medical devices, rail vehicles, drive enclosures, hotel HVAC, industrial cleaning machines, electronic cabinets, new-energy vehicles and supermarket refrigeration who need a 500 mm axial unit rated for 400 V three-phase supply. It is not for PC builders or DIY enthusiasts working with standard 12 V or 24 V case cooling, nor for installations that only have single-phase mains available.

400-460 V three-phase voltage rating

The defining specification is the 400 V / 460 V three-phase input at 50-60 Hz with a current draw of 0.9 A at the lower speed and 1.7 A at the higher speed. Without a compatible three-phase supply and matching motor starter the fan will not operate, so this electrical interface alone decides whether the part can be used in a given project.

特長

  • Axial airflow delivers 500 mm blade cooling for dense equipment
  • 400 V three-phase supply powers 550 W motor in industrial racks
  • IP54 rating protects internals from dust and water splashes
  • Dual-speed motor runs at 1180 or 1640 rpm for variable thermal loads
  • Five-blade design balances static pressure and acoustic output

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 500mm axial fan fit alongside the existing 220mm and 250mm fans in my rack?

The 500mm blade diameter is larger than the 220mm and 250mm models listed, so verify the mounting pattern and clearance before installation.

How can I confirm the W4D500-GD03-01Motor is running at the correct speed after wiring it to 400V?

At 50Hz the motor should turn at 1180 r/min and at 60Hz at 1640 r/min; measure with a tachometer to verify.

Does the box include mounting brackets or a power cable for the IP54 axial fan?

The supplied data lists only the fan unit itself; brackets and a 400V supply cable must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。