暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four black and silver brass rotary fittings with G1/4 threads

FormulaMod

FormulaMod GD-FT14 G1/4" Rotary Fitting 4-Pack Black/Silver

SKU CH-B1YA-6PJSH

Four brass G1/4" rotary fittings with anti-off hard-tube adaptors in black and silver

  • TypeWater Blocks
  • Fan SizeNo Fans
  • ColorBlack
  • Brass construction resists corrosion in liquid loops
  • G1/4" threads fit standard water-block ports
  • Rotary design allows angle adjustment after install
  • Four-piece set covers a typical CPU-and-GPU loop
  • Black and silver finish matches common build themes

G1/4" Rotary Hard-Tube Fittings

This set supplies four G1/4" brass rotary adaptors finished in black and silver. Each fitting threads into a standard water-block or radiator port and accepts rigid tubing for a secure, leak-tested seal. The revolvable joint lets the tube exit at any angle without stressing the acrylic or PETG run. They arrive new and ready for immediate loop assembly.

Build Integration Without Kinking

Because the body rotates independently of the base thread, tubing can be routed straight from the block to the next component even when ports are tightly spaced. The anti-off collar grips the hard tube once inserted, so no separate compression ring is required. Four pieces cover a typical CPU-and-GPU loop or allow spare fittings for future expansion. Brass construction resists corrosion in mixed-metal loops.

For Custom Hard-Tube Loops Only

Builders planning a rigid-tube build with G1/4" ports will find the rotary action saves time on bend planning. Anyone using soft tubing, push-fit connectors or non-G1/4" thread standards should choose different fittings. The pack contains no tubing, tools or coolant, so those items must be sourced separately.

特長

  • Brass construction resists corrosion in liquid loops
  • G1/4" threads fit standard water-block ports
  • Rotary design allows angle adjustment after install
  • Four-piece set covers a typical CPU-and-GPU loop
  • Black and silver finish matches common build themes

仕様

SeriesN/A
TypeWater Blocks
Fan SizeNo Fans
ColorBlack

この商品に関する質問

How much torque can the G1/4" rotary joint take before it leaks?

The brass rotary fitting uses a standard G1/4" thread; hand-tighten plus a quarter turn with a soft-jaw wrench is the usual practice to avoid over-stressing the O-ring.

Do the fittings get hot or make noise when the loop runs continuously?

Brass conducts heat but the fittings themselves have no moving parts or fans, so they add no audible noise and only reach coolant temperature.

What tubing size and tools do I need to install these?

They accept standard G1/4" hard tube; you will need matching 14 mm OD hard tube, a tube cutter, reamer and two spanners for the rotary lock rings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。