暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Fractal Design

Fractal Design Pop Air RGB FD-C-POR1A-06 PC case

SKU CH-Y86F-16TG5 MPN FD-C-POR1A-06

Mid-tower ATX case with mesh front panel, tempered glass side, three pre-installed 120 mm RGB fans and room for 280 mm front radiator

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Three pre-installed Aspect 12 RGB fans give instant lighting and airflow
  • Hexagonal mesh front panel maximises air intake for cooler components
  • Supports 280 mm front and 240 mm top radiators for liquid cooling
  • Fits graphics cards up to 405 mm with front fans mounted
  • Two dual-size drive trays hold both 3.5" and 2.5" drives simultaneously

Pop Air RGB Mid-Tower

The Fractal Design Pop Air RGB is a steel and tempered-glass ATX mid-tower case built for high-airflow builds. It ships with three 120 mm Aspect RGB fans and a hexagonally patterned front mesh that feeds cool air to components. The side panel uses clear tempered glass to show the interior.

Suits RGB airflow builds.

This case suits builders who want strong front-to-rear airflow and addressable RGB lighting out of the box. It is less suited for noise-sensitive workstations because the open mesh and included fans prioritise cooling over silence. Small-form-factor enthusiasts should look at smaller Mini-ITX chassis instead.

Front radiator limit 280 mm

The front panel accepts radiators up to 280 mm, which is the key constraint for liquid-cooling planning. Top mounts support 240 mm radiators with a 46 mm RAM-height restriction, while the rear takes a 120 mm unit..Graphics cards up to 405 mm long fit with the front fans in place.

特長

  • Three pre-installed Aspect 12 RGB fans give instant lighting and airflow
  • Hexagonal mesh front panel maximises air intake for cooler components
  • Supports 280 mm front and 240 mm top radiators for liquid cooling
  • Fits graphics cards up to 405 mm with front fans mounted
  • Two dual-size drive trays hold both 3.5" and 2.5" drives simultaneously

仕様

BrandFractal Design
SeriesPop Air RGB
ModelFD-C-POR1A-06
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Side PanelTempered Glass Panel
LEDRGB
External 5.25" Drive BaysNo
Internal 3.5" Drive Bays3 (2 included)
Internal 2.5" Drive Bays4 (2 included)
Expansion Slots7
Front Ports2 x USB 3.0, 2 x Audio, Optional USB 3.2 Gen 2x2 Type-C via upgrade kit (sold separately)
Fan OptionsFront: 2 x 120mm (2 x Aspect 12 RGB included) / 2 x 140mm fan
Top: 2 x 120mm / 2 x 140mm fan
Rear: 1 x 120mm fan (1 x Aspect 12 RGB included)
Pre-installed FansFront - 2 x 120mm / Rear - 1 x 120mm
Radiator OptionsFront: 280mm
Top: 240mm (max 46mm RAM height)
Rear: 120mm
Max GPU Length405 mm with front fan mounted
Max CPU Cooler Height170 mm
Max PSU Length170 mm
Dimensions18.64" x 8.46" x 17.87"
Weight15.87 lbs.
FeaturesAccommodates ATX / mATX / Mini ITX Motherboards
Easily mounted tempered glass side panel lets you showcase your components
Comes with three 120 mm Aspect 12 RGB fans (and supports two more for a total of five)
Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
The easy-to-clean front mesh acts as a dust filter while allowing high airflow
Front I/O comes with two 3.0 USB 5 Gb/s ports, Mic and headphone jacks
Newly developed RGB controller and RGB power LEDs
Optional USB-C upgrade kit (available separately) adds a full speed USB Type-C front port
Comes
Package ContentPop Air case
Accessory bag
User manual
Radiator brackets
配送重量9.30 kg
梱包サイズ559 × 559 × 305 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard and power supply do I need to install in the Pop Air RGB case?

The case accepts ATX, Micro-ATX and Mini-ITX motherboards and is designed for a bottom-mounted ATX power supply up to 170 mm long.

Can I keep my existing 3.5-inch hard drives and 2.5-inch SSDs when moving to this case?

Yes, two combined trays each hold one 3.5-inch and one 2.5-inch drive simultaneously, and two additional 2.5-inch mounts are included.

How do I verify the three pre-installed Aspect 12 RGB fans and the front-panel RGB LEDs are functioning after assembly?

Connect the included RGB controller to a motherboard 5 V addressable header or use its built-in button; the fans and power LEDs should light and respond to colour changes immediately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。