BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
G.SKILL
16 GB dual-channel DDR3 kit running at 1600 MT/s with CL10 timing at 1.50 V
This G.SKILL Ares Series kit provides 16GB of DDR3 memory in a matched pair of 8GB modules. It runs at 1600MHz with CL10 timings of 10-10-10-30 2N at 1.50V. The unbuffered, non-ECC DIMMs are designed for dual-channel operation on desktop platforms.
Verify that your motherboard has four 240-pin DDR3 slots and supports 1.50V operation at 1600MHz. Confirm the board’s qualified vendor list includes this model or that the BIOS can apply the 10-10-10-30 2N timings. Ensure the CPU memory controller is rated for DDR3 1600 speeds.
The kit targets Intel Z87, Z77, Z68 and P67 chipsets for native dual-channel performance. Two slots remain free on a four-slot board for future expansion. The low-profile design clears most CPU coolers without blocking adjacent PCIe slots.
| Brand | G.SKILL |
|---|---|
| Series | Ares Series |
| Model | F3-1600C10D-16GAB |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-30 2N |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Intel Z87/ Z77/ Z68/ P67 |
| Color | N/A |
| 配送重量 | 0.11 kg |
| 梱包サイズ | 204 × 133 × 18 mm |
The kit is validated for Intel Z87, Z77, Z68 and P67 chipsets, so a Z77 board is supported.
The modules run at 1.50 V with CL10 10-10-10-30 2N timings at DDR3 1600; most boards will apply these settings automatically.
This is a matched dual-channel pair; adding a third module would force single-channel operation and may cause instability.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?