暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules without heat spreaders in a row

G.SKILL

G.SKILL F5-6000R3036G48GE8-G5 384GB (8 x 48GB) DDR5 6000 ECC Registered Server RAM

SKU CH-BTFZ-F50Q0 MPN F5-6000R3036G48GE8-G5

Eight 48 GB DDR5 RDIMMs deliver 384 GB of ECC registered memory at 6000 MT/s with CL30 timing for Intel W790 workstations

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-36-36-96
  • Voltage1.40V
  • 384 GB octa-channel capacity for memory-intensive workloads
  • DDR5 6000 speed with CL30 latency for responsive data access
  • Registered ECC design with on-die and side-band ECC for error correction
  • Intel XMP 3.0 profile enables one-click overclock configuration
  • Validated for Intel Xeon W-3400X series on W790 chipset

High-Capacity DDR5 RDIMM Kit

This G.SKILL G5 Series kit delivers 384GB across eight 48GB DDR5 RDIMM modules. It targets workstations built on the Intel W790 chipset that require registered ECC memory for data integrity. The octa-channel configuration matches platforms such as the Xeon W-3400X series where maximum bandwidth and capacity are critical.

XMP 3.0 Profile and ECC Impact

An Intel XMP 3.0 profile sets the kit to DDR5 6000 at CL30 with timings of 30-36-36-96 and 1.40V. Activating the profile raises operating frequency above standard JEDEC speeds while keeping on-die and side-band ECC active. Stability at the rated overclock depends on motherboard QVL validation and CPU memory-controller capability.

Bare Modules for Dense Configurations

The modules ship without heat spreaders, reducing height for tight server or workstation chassis. Each 288-pin RDIMM uses registered buffering to lighten electrical load on the memory controller across all eight channels. A dedicated temperature sensor on each DIMM allows platform monitoring during sustained workloads.

特長

  • 384 GB octa-channel capacity for memory-intensive workloads
  • DDR5 6000 speed with CL30 latency for responsive data access
  • Registered ECC design with on-die and side-band ECC for error correction
  • Intel XMP 3.0 profile enables one-click overclock configuration
  • Validated for Intel Xeon W-3400X series on W790 chipset

仕様

BrandG.SKILL
SeriesG5 Series
ModelF5-6000R3036G48GE8-G5
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-36-36-96
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Multi-channel KitOcta Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ChipsetIntel W790 Series Chipset (w/ Octo-Channel Memory Support)
Heat SpreaderNo
FeaturesHigh performance DDR5 R-DIMM memory kit
Optimized for Intel Xeon W-3400X series processors
Requires compatible Intel W790 chipset motherboard w/ 8-channel support
On-die ECC & side-band ECC
Dedicated temperature sensors
Intel XMP 3.0 Support
配送重量0.18 kg
梱包サイズ244 × 178 × 36 mm

この商品に関する質問

Will the eight 48 GB RDIMMs need any firmware updates or periodic re-seating to maintain ECC integrity?

No firmware updates or re-seating are required; on-die ECC and side-band ECC operate automatically once the kit is installed in a compatible W790 platform.

What thermal limit is reached first when all eight modules run at 6000 MT/s continuously?

The dedicated temperature sensor on each module reports junction temperature to the platform; throttling engages before the ICs exceed their safe operating threshold.

How much power does the 1.40 V kit draw and how loud is the airflow needed to cool 384 GB under full load?

The kit operates at 1.40 V with no heat spreader; power draw scales with bandwidth and cooling noise depends on the chassis fans selected for the W790 workstation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。