G.SKILL F4-4266C19D-16GTRS Trident Z Royal 16GB DDR4 4266 CL19 desktop RAM
- 16GB (2 x 8GB)
- DDR4 4266 (PC4 3410…
G.SKILL
32 GB dual-channel DDR4 kit running at 3200 MT/s with CL14 timings and RGB crystalline light bar
Capacity 32GB (2 x 16GB)
Speed DDR4 3200 (PC4 25600)
Color Gold
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
G.SKILL Trident Z Royal F4-3200C14D-32GTRG is a 32GB dual channel kit built from two 16GB unbuffered DDR4 modules. Each stick runs at 3200 MT/s with a tight CL14 14-14-14-34 timing at 1.35V. The crystalline light bar uses eight addressable RGB zones per module to refract light across a mirrored gold heatspreader. Hand-screened ICs sit on a custom ten-layer PCB designed for stability.
This kit targets enthusiasts assembling high-performance desktops on platforms that support DDR4 3200 and XMP profiles. The low CL14 timing benefits workloads sensitive to memory latency. Buyers who need ECC error correction or registered modules for server-grade stability should look elsewhere. Systems limited to lower voltage standards or single channel architectures will not utilise the rated performance.
Most DDR4 3200 kits ship with CL16 or higher latency; the CL14 rating here marks a measurable step up in response time for compatible CPUs and motherboards. If the platform cannot run the XMP profile at 1.35V the modules will fall back to standard JEDEC speeds and timings. Verify that the board and processor support the rated frequency and voltage before purchasing.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-3200C14D-32GTRG |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL14 |
| Timing | 14-14-14-34 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Gold |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | AMD X570 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 |
| LED Color | RGB |
| 配送重量 | 0.24 kg |
| 梱包サイズ | 180 × 135 × 23 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Yes, the kit uses the standard 288-pin DDR4 form factor that matches any desktop board with DDR4 slots.
Enter the BIOS and load the XMP profile; the step many miss is saving and exiting so the 1.35 V setting actually applies.
Dust the aluminum fins and light bar with compressed air every few months; no thermal pads or LEDs are user-replaceable.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?