暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black compact micro-tower with perforated mesh front panel and RGB lighting strip

GAMDIAS Technology

GAMDIAS Technology GD-ATHENA M4M PC case

SKU CH-3EE7-XPFZ6 MPN GD-ATHENA M4M

Compact micro-tower case supports 395 mm GPU, dual 360 mm radiators, 175 mm CPU cooler and 150 mm PSU with three 120 mm fans delivering 57.56 CFM airflow

  • ColorBlack
  • Power Supply MountedFront
  • Motherboard CompatibilityMicro ATX
  • LEDARGB
  • Dust FiltersBottom
  • Internal 3.5" Drive Bays1

Model ATHENA M4M

  • ATHENA M4M WOOD
  • ATHENA M4M WOOD + 650W Gold PSU
  • ATHENA M4M WOOD + 850W Gold PSU
  • ATHENA M4M

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Fits GPUs up to 395 mm for high-end graphics in a compact build
  • Supports dual 360 mm radiators top and bottom for serious liquid cooling
  • Three 120 mm NOTUS M1 fans deliver up to 57.56 CFM airflow out of the box
  • Front-mounted ATX PSU with downward ports simplifies cable routing
  • 8-port PWM ARGB hub included to synchronise lighting and fan control

Compact micro-tower with front-mounted PSU

The GAMDIAS ATHENA M4M is a black micro-tower case that accepts Micro-ATX motherboards and full-size ATX power supplies mounted at the front. It fits graphics cards up to 395 mm long, CPU coolers up to 175 mm tall and power supplies up to 150 mm deep. Perforated mesh on the front panel and an ARGB lighting strip give the compact chassis a distinctive look.

Three pre-installed fans and an 8-port PWM ARGB hub

Three 120 mm NOTUS M1 fans ship already fitted, delivering up to 57.56 CFM of airflow while keeping noise low. The bundled 8-port hub lets every fan and the front RGB strip share a single PWM and 5 V 3-pin ARGB header, so lighting and speed stay synchronised without extra cables. A PSU extension cable is also included to simplify routing to the rear of the case.

Suits builders who want dual 360 mm radiators

Dual 360 mm radiator mounts at the top and bottom make the case viable for high-end liquid cooling despite its 446 x 235 x 347 mm frame. It also supports connector-hidden motherboards for cleaner cable runs. Builders who need more than one 3.5-inch drive, more than two 2.5-inch drives, or front-panel USB 3.1 Gen 2 ports should look elsewhere.

特長

  • Fits GPUs up to 395 mm for high-end graphics in a compact build
  • Supports dual 360 mm radiators top and bottom for serious liquid cooling
  • Three 120 mm NOTUS M1 fans deliver up to 57.56 CFM airflow out of the box
  • Front-mounted ATX PSU with downward ports simplifies cable routing
  • 8-port PWM ARGB hub included to synchronise lighting and fan control

仕様

ColorBlack
Power Supply MountedFront
Motherboard CompatibilityMicro ATX
LEDARGB
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Front PortsUSB 3.0 / Audio
Max GPU Length395 mm
Max CPU Cooler Height175 mm
Max PSU Length150 mm
Dimensions446 x 235 x 347mm
配送重量6.60 kg
梱包サイズ502 × 396 × 305 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I clean the dust filters on the bottom of the ATHENA M4M?

The case includes a bottom dust filter that can be removed and cleaned with compressed air or water, then dried before reinstallation to maintain airflow.

Which dimension limits a high-end graphics card in this case?

The maximum GPU length supported is 395 mm, so any card longer than that will not fit inside the chassis.

How loud are the three included NOTUS M1 fans when the system runs all day?

The three pre-installed 120 mm NOTUS M1 fans deliver up to 57.56 CFM airflow and are designed for quiet operation, with the rear fan adding ARGB lighting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。