OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
GAMEMAX
Micro-ATX case with four pre-installed ARGB fans, tempered glass side panel and mesh front delivering 48.3% open area for airflow
The GAMEMAX Defender MB is a Micro-ATX chassis that also fits Mini-ITX boards. It comes with four pre-installed 120 mm ARGB fans and a tempered-glass side panel. Builders who want a smaller footprint without giving up liquid-cooling support will find the layout practical. Buyers who need E-ATX motherboard support or more than five expansion slots should look elsewhere.
The case accepts graphics cards up to 410 mm long when the front cover is used without extra fans. That single dimension determines whether a long RTX 4000 series card will install without modification. If your card exceeds that length you will need a different enclosure.
A top-panel LED button cycles through 16 lighting modes with 30 total play-through options including RGB, breathing, single colour and light off. The included ARGB fans are proprietary to this case so replacements must match the same connector and form factor.
Both the top and front mounting points accept radiators up to 360 mm, giving flexibility for AIO placement. Dust filters on the bottom, right side and top cover help keep the interior clean during operation.
| Brand | GAMEMAX |
|---|---|
| Model | Defender MB |
| Type | Micro ATX |
| Color | Black |
| Case Material | Front Panel: ABS, Mesh Top Panel: metal cover Side Panel: Left: Tempered Glass Right: Metal cover |
| With Power Supply | No |
| Power Supply Mounted | Bottom/ATX |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | 1 x Side Tempered Glass Panel |
| Dust Filters | Bottom, right side panel and top cover with dust filter |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 3 1*3.5HDD+3*2.5SSD or 2*3.5HDD+2*2.5SSD |
| Expansion Slots | 5 |
| Front Ports | 2 x USB 2.0, 1 x USB 3.0, 1 x Audio, 3 x Button, RGB Controller |
| Fan Options | Front: 1x12cm ARGB Fan (FN12A-M6), 2x12cm ARGB Fan (FN12A-S6) Top: 3x120mm, 2x140mm (Fan optional) Rear: 1x12cm ARGB Fan (FN12A-S6I) M/B Cover: 2x120mm (Fan optional) PSU Cover: 2x120mm (Fan optional) |
| Pre-installed Fans | Front - 3 x 120mm / Rear - 1 x 120mm |
| Radiator Options | Front: 120mm, 140mm,240mm,280mm,360mm Top: 120mm, 140mm,240mm,280mm,360mm Rear: 120mm M/B Cover: 120mm, 240mm |
| Max GPU Length | Up to 410mm(front cover w/o fan) |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | up to 265mm(front cover w/o Water Cooling) |
| Dimensions | (L)415*(W)210*(H)435mm |
| 配送重量 | 10.00 kg |
| 梱包サイズ | 435 × 415 × 210 mm |
The case fits graphics cards up to 410 mm long when the front cover is used without additional fans installed.
The front USB 3.0 port runs at up to 5 Gbps, matching the USB 3.0 specification.
The case allows CPU coolers up to 165 mm tall, measured from the motherboard surface to the side panel.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?