OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
GIGABYTE
Refurbished GeForce RTX 2070 Super with 8GB GDDR6, 2560 CUDA cores, 1785 MHz boost clock and triple-fan WINDFORCE cooling
The GIGABYTE GeForce RTX 2070 Super WINDFORCE OC 3X is a refurbished graphics card built on the NVIDIA Turing architecture with 2560 CUDA cores and a 1785 MHz boost clock. It targets 1440p gaming and VR workloads through 8GB of GDDR6 memory on a 256-bit bus. The WINDFORCE 3X cooler uses alternate spinning fans and a metal back plate for thermal control.
This card suits builders with a 650W power supply, an 8-pin and 6-pin connector, and space for a 2.5-slot, 286 mm long ATX board. It drives up to four displays via one HDMI 2.0b and three DisplayPort 1.4 outputs at 7680 x 4320 resolution. Buyers needing PCI Express 4.0 bandwidth or a single 12-pin power connector should look elsewhere.
The 235 W thermal design power sets the minimum 650 W PSU requirement and dictates the dual 8-pin plus 6-pin power layout. If your chassis cannot exhaust that heat or your power supply lacks the required cables, this model will not operate stably. Match the TDP to your build before ordering.
| Brand | GIGABYTE |
|---|---|
| Model | GV-N207SWF3OC-8GD |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU | GeForce RTX 2070 SUPER |
| Core Clock | 1785 MHz |
| CUDA Cores | 2560 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Max Resolution | 7680 x 4320 @ 60 Hz |
| SLI Support | 2-way NVIDIA NVLINK |
| Virtual Reality Ready | Yes |
| Cooler | WINDFORCE 3X |
| Thermal Design Power | 235W |
| System Requirements | System PSU Limitation: 650W |
| Power Connector | 1 x 8-Pin, 1 x 6-Pin |
| Features | Powered by GeForce RTX 2070 SUPER Integrated with 8GB GDDR6 256-bit memory interface WINDFORCE 3X Cooling System with alternate spinning fans Extreme Durability and Overclocking Protection Metal Back Plate |
| Form Factor | ATX |
| Max GPU Length | 286 mm |
| Card Dimensions (L x H) | 11.26" x 4.49" |
| Slot Width | 2.5 slot |
| 配送重量 | 1.59 kg |
| 梱包サイズ | 409 × 226 × 97 mm |
The card measures 286 mm long and occupies 2.5 slots, so confirm your case has at least that much clearance and the motherboard layout leaves adjacent slots free.
Connect one 8-pin and one 6-pin PCIe power cable from a 650 W or larger PSU; forgetting the 6-pin is the most common oversight.
Use compressed air to blow dust from the three alternate-spinning fans and heatsink fins every few months; avoid liquid cleaners and do not disassemble the metal back plate.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?