GIONEDA
GIONEDA mSATA 256GB internal SSD
An mSATA internal SSD with 3D NAND delivering sequential reads up to 560 MB/s and writes up to 500 MB/s for faster boots and file loads
- Device TypeInternal Solid State Drive (SSD)
- Form FactormSATA
- Memory Components3D NAND
- Fast boot and load times with sequential reads up to 550 MB/s
- Responsive file writes at sequential speeds up to 500 MB/s
- Data integrity through bad-block management, TRIM, garbage collection and S.M.A.R.T. monitoring
- Proven reliability with 1.75M hours MTTF and original flash chips
- Cool, silent operation in a compact 30 × 50 × 3.5 mm mSATA form factor
Capacity and fit
The GIONEDA mSATA 256GB drive uses the mSATA form factor measuring 50mm by 30mm by 3.5mm. It fits laptops and desktops that provide an mSATA slot and connects over a SATA 6 Gb/s link.
Build and daily use
3D NAND flash and a controller with bad-block management, TRIM and garbage collection keep performance steady. No moving parts mean silent operation, low heat and 35x better energy efficiency than a mechanical drive.
Upgrade path
Replacing a 2.5-inch hard drive with this SSD yields up to 550MB/s sequential read and 500MB/s sequential write. The 1.75M-hour MTTF rating and three-year warranty back the switch for older systems needing faster boot and load times.
特長
- Fast boot and load times with sequential reads up to 550 MB/s
- Responsive file writes at sequential speeds up to 500 MB/s
- Data integrity through bad-block management, TRIM, garbage collection and S.M.A.R.T. monitoring
- Proven reliability with 1.75M hours MTTF and original flash chips
- Cool, silent operation in a compact 30 × 50 × 3.5 mm mSATA form factor
仕様
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Form Factor | mSATA |
| Memory Components | 3D NAND |
このモデルの他のバージョン
同シリーズにさらに 2点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
GIONEDA mSATA internal SSD 128GB/256GB/512GB/1TB/2TB
- Internal Solid Stat…
- mSATA
この商品に関する質問
What SATA revision does the GIONEDA mSATA 256GB use and what real-world throughput does it cap at?
The drive runs on SATA 6 Gb/s, so sequential reads top out around 550 MB/s and writes around 500 MB/s in typical use.
What are the exact dimensions I need to clear in my laptop or desktop slot?
The board measures 50 mm × 30 mm × 3.5 mm, the standard mSATA footprint.
How do I install it and which step do people most often miss?
Insert the drive at an angle into the mSATA slot, press it flat, and secure it with the single retention screw; the step most often missed is fastening that screw, leaving the drive unseated.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM





