暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive with label showing 1.2TB 10000RPM

HGST

HGST 1.2TB 10000RPM SAS 12Gb/s 2.5" internal hard drive

SKU CH-XJHH-JFS3K

A 1.2 TB 2.5-inch SAS drive spinning at 10000 RPM with a 12 Gb/s interface for server storage

  • 2 TB capacity stores large server datasets
  • 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense drive bays
  • New condition delivers full manufacturer reliability

Server storage drive

The HGST 1.2 TB 10000 RPM SAS drive is built for enterprise servers and storage arrays that require high-speed 12 Gb/s connectivity. Its 2.5 inch form factor fits dense 2.5 inch bays in rackmount and blade chassis. The 10K spindle delivers low latency for transactional workloads and database logs.

Suited for high-throughput arrays

This drive suits administrators who need 1.2 TB of fast SAS capacity for primary storage or caching tiers. Buyers who need larger capacities for archival storage or who require a 3.5 inch form factor should look at other models. Systems without a 12 Gb/s SAS backplane or HBA cannot use this drive.

12 Gb/s SAS interface

The single specification that decides compatibility is the 12 Gb/s SAS interface. The drive connects only to controllers and backplanes that support this signalling rate and the SAS protocol. Verify that your server or enclosure provides a 2.5 inch SAS bay with 12 Gb/s support before purchase.

特長

  • 2 TB capacity stores large server datasets
  • 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense drive bays
  • New condition delivers full manufacturer reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install this 2.5" SAS drive in a 3.5" server bay?

Use a 2.5-to-3.5 inch drive tray or adapter bracket, secure the drive with four screws, then connect the SAS data and power cables to the backplane or controller.

What maintenance will the 10000RPM 1.2TB drive need over time?

Monitor SMART attributes for reallocated sectors and bearing noise; replace the drive if the annualised failure rate rises or if the controller logs consistent read errors.

At what point does the 12Gb/s SAS interface become the bottleneck during sustained writes?

The 12Gb/s SAS link caps sequential throughput at roughly 1.2 GB/s, so sustained write workloads exceeding that rate will queue at the interface before the platters saturate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。